Withdrawal sleeve FAG AHX3126

FAG AHX3126 is a withdrawal sleeve reference, within Bushings and sleeves. Request a quote for AHX3126 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The FAG AHX series withdrawal sleeve is a fastening and retaining component used to facilitate the removal of bearings mounted with interference fit. It is placed on the shaft and, by means of thread and nut, allows the bearing to be extracted without damaging the seat or the bearing itself. It is a key part in industrial maintenance tasks, where access is limited and controlled extraction is required. MR Accesorios Industriales sells this series as part of its line of mounting and dismounting components.

The AHX series designation is interpreted as a withdrawal sleeve with metric thread and standardized dimensions. The examples AHX310, AHX311, AHX312, AHX317, AHX318, AHX319, AHX320 and AHX322 show codes that combine the AHX prefix with a number indicating the sleeve size, correlated with the shaft diameter and the bearing to be removed. Each code corresponds to a specific size; therefore, to select the correct one, you must identify the mounted bearing and consult the equivalence with the appropriate sleeve.

These sleeves are used in industries in Argentina such as food, cement, steel and mining, where bearings work with interference fits and require periodic replacement. They are also common in power transmission equipment, pumps, fans and machine tools. In production plants, the use of a suitable withdrawal sleeve reduces downtime and prevents damage to the shaft or housing during maintenance tasks.

To select the sleeve, take into account the shaft diameter, the bearing type and the fastening system. It is essential to verify the thread and pitch, as well as compatibility with the extraction nut. During assembly, make sure the surfaces are clean and lubricated to facilitate sliding. Correct alignment and the use of suitable tools prevent deformation. If the bearing has a special suffix, consult the technical documentation to confirm interchangeability.

Regarding equivalences between brands, withdrawal sleeves usually follow dimensional standards that allow interchangeability, but it is essential to verify the exact code and critical dimensions. Not all manufacturers use the same nomenclature, so replacement must be based on actual measurements and not only on the code. To ensure compatibility, compare the bore diameter, thread and sleeve length with the bearing to be removed.

If you need an FAG AHX series withdrawal sleeve, message us on WhatsApp with the part number or bearing model and we will quote you promptly. At MR Accesorios Industriales we have more than 80 years of experience in the field and we advise you so you can choose the right part. Send us your inquiry and we will respond with the information you need for your maintenance.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.