FAG AHX2315 withdrawal sleeve

FAG AHX2315 is a reference of withdrawal sleeve, within Bushings and sleeves. Request a quote for AHX2315 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The FAG withdrawal sleeve AHX series is a fastening and retaining component used to facilitate the removal of bearings mounted with an interference fit. It is placed on the shaft and, by means of a thread and nut, allows the bearing to be extracted without damaging the seat or the bearing itself. It is a key part in industrial maintenance tasks, where access is limited and controlled extraction is required. MR Accesorios Industriales sells this series as part of its line of mounting and dismounting components.

The designation of the AHX series is interpreted as a withdrawal sleeve with metric thread and standardized dimensions. The part numbers in the series combine the AHX prefix with a number that indicates the sleeve size, correlated with the shaft diameter and the bearing to be removed. Each part number corresponds to a specific size; therefore, to select the correct one, you must identify the mounted bearing and check the equivalence with the appropriate sleeve.

These sleeves are used in industries in Argentina such as food, cement, steel and mining, where bearings work with interference fits and require periodic replacement. They are also common in power transmission equipment, pumps, fans and machine tools. In production plants, using an appropriate withdrawal sleeve reduces downtime and prevents damage to the shaft or the housing during maintenance tasks.

To select the sleeve, take into account the shaft diameter, the bearing type and the fastening system. It is essential to verify the thread and pitch, as well as compatibility with the extraction nut. During mounting, make sure the surfaces are clean and lubricated to facilitate sliding. Correct alignment and the use of appropriate tools prevent deformation. If the bearing has a special suffix, consult the technical documentation to confirm interchangeability.

Regarding equivalences between brands, withdrawal sleeves usually follow dimensional standards that allow interchangeability, but it is essential to verify the exact part number and critical dimensions. Not all manufacturers use the same nomenclature, so replacement must be based on actual measurements and not only on the part number. To ensure compatibility, compare the bore diameter, thread and sleeve length with the bearing to be removed.

If you need a FAG withdrawal sleeve AHX series, write to us on WhatsApp with the part number or the bearing model and we will quote you shortly. At MR Accesorios Industriales we advise you so that you choose the correct part. Send us your inquiry and we will reply with the information you need for your maintenance.