Withdrawal sleeve FAG AH3316

FAG AH3316 is a withdrawal sleeve reference, within Bushings and sleeves. Request a quote for AH3316 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The FAG withdrawal sleeve AH series is a fastening and retaining component used to remove bearings, bushings or other elements mounted with a tapered fit. It is placed on the shaft or against the part and, by means of a thread or drive, generates the thrust needed to dismount without damaging the seat. It is a key part in industrial maintenance tasks, where clean disassembly prevents damage to shafts and housings.

The AH series designation is read with the fixed prefix and a number that indicates the size. For example, AH208, AH209 and AH210 correspond to sleeves of different dimensions within the same family. The number is not a material or thread code: it identifies the sleeve size and its compatibility with the element to be removed. To choose the right one, you must cross-reference that number with the dimensions of the shaft and of the bearing or bushing to be removed.

In Argentine industry, these sleeves are used in the maintenance of machine tools, pumps, fans, conveyors and process equipment. They also appear in grinding shops and in plants where bearings with tapered mounting are dismounted. As a dismounting part, they are usually ordered by exact part number, since a wrong size can damage the seat or fail to generate the necessary thrust.

To select the sleeve, take into account the shaft diameter and taper, the type of bearing or bushing mounted and the space available for the tool. During mounting and dismounting, check the alignment and use a suitable lubricant to reduce the effort. If the sleeve is threaded, check that the thread is clean and undamaged. Poor alignment can mark the shaft or deform the sleeve, so it is best to work with the part well supported.

Withdrawal sleeves are available under different brands and designations depending on the manufacturer. Interchangeability is not automatic: even if the number matches, the thread, length or treatment may vary. Therefore, when replacing a sleeve, the safest approach is to compare the original part number or send the shaft and bearing dimensions. MR Accesorios Industriales carries the FAG brand and can guide you with the exact part number.

If you need a FAG withdrawal sleeve AH series, send the full part number via WhatsApp. At MR Accesorios Industriales we'll quote you shortly and help you confirm that the designation matches your application. You can also ask about other sizes in the same series or about alternatives for your equipment.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.