FAG 7209-B-XL-2RS-TVP angular contact ball bearing
- Brand
- FAG
- Category
- Bearings
- Subcategory
- Angular contact ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read FAG 7209-B-XL-2RS-TVP
- 72Series
- Angular contact ball bearings, 72 series. For the same bore, each series has a different outside diameter and width.
- 09Bore
- 45 mm bore: 09 × 5.
- B-XL-2RS-TVPSuffix
- FAG suffix: it defines the variant (sealing, cage, internal clearance or other features).
7209 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The FAG 7209-B-XL-2RS-TVP bearing has a 45 mm bore, a 85 mm outside diameter and a 19 mm width (45 x 85 x 19 mm).
FAG 7209-B-XL-2RS-TVP is a reference of angular contact ball bearing, within Bearings. Request a quote for 7209-B-XL-2RS-TVP via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
FAG angular contact bearings are ball bearings with offset raceways that allow them to handle combined radial and axial loads in a single direction. The series shown here combines the B design, 2RS sealing and the TVP polyamide cage, and is used in applications requiring rigidity and running precision, such as spindles, pumps and gearboxes. MR Accesorios Industriales supplies them in Buenos Aires, Argentina.
The designation is read in blocks. The base number identifies the series and size: examples 7004, 7005 and 7006 correspond to the 70 series, of light section, while 7200, 7201 and 7202 belong to the 72 series, of heavier section. The letter B indicates the 40° contact angle, designed for significant axial loads. The XL suffix indicates the optimized design of the current generation. The 2RS indicates sealing on both sides, and TVP, a polyamide cage reinforced with fiberglass. With that data you can already locate the bearing within the catalogue.
These bearings appear in machine tool spindles, centrifugal pumps, compressors, gearboxes and transmission equipment. In Argentine industry they are found in packaging lines, mills, extruders and textile machines, where rotation must be precise and axial load is present. Being angular contact, they are generally mounted in pairs, in back-to-back or face-to-face arrangement, to distribute the load in both directions and give rigidity to the assembly.
To choose well, take into account internal clearance, the type of sealing and lubrication. The 2RS sealing protects against dust and moisture, but adds some friction; if the environment is clean and the speed high, an open variant may be preferable. The TVP cage is light and resistant, suitable for most applications. During mounting, take care with the alignment of the supports and apply the correct preload: a poorly preloaded angular contact bearing loses precision and service life.
As for equivalences, each manufacturer has its own nomenclature for angular contact bearings. The same size may appear with different codes depending on the brand, and the sealing, cage and angle suffixes do not always match. Therefore, the safest approach is to compare by dimensions and technical characteristics, not only by the code. If you have the number from another brand, send it to us and we'll cross-reference it with the FAG line we supply.
MR Accesorios Industriales supplies the FAG brand as part of its bearing line. If you need a part number from this series, write to us on WhatsApp with the full model and we'll quote you shortly. We can also advise you on the mounting arrangement and installation care so that the bearing performs as it should.
Dimensions
Boundary dimensions of the basic designation 7209 per ISO 15: 45 x 85 x 19 mm (d x D x B).
- Bore
- 45mm
- Outside diameter (D)
- 85mm
- Width (B)
- 19mm
Same size in SKF and other brands
Pages from other brands with the basic designation 7209: 45 x 85 x 19 mm (d x D x B) per ISO 15.
- Looking for the SKF 7209? We also quote:7209 BEP7209 BECBJ7209 BECBM7 more →
- NSK7209 AW7209 BW7209 BEA T85MR, T7
- NTN72097209B7209C
- RKB7209
- TIMKEN7209 B
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the FAG 7209-B-XL-2RS-TVP bearing?
- The FAG 7209-B-XL-2RS-TVP bearing has a 45 mm bore, a 85 mm outside diameter and a 19 mm width (45 x 85 x 19 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 7209.
- What does the 2RS suffix mean on these bearings?
- The 2RS suffix indicates that the bearing is sealed on both sides. That sealing protects against dust and moisture, and helps retain the lubricant. It is a common option in environments with moderate contamination, although it adds some friction compared to an open variant.
- Can they be mounted individually or are they always mounted in pairs?
- Angular contact bearings support axial load in a single direction, so they are usually mounted in pairs, facing each other. This way the assembly absorbs loads in both directions and gains rigidity. If your application allows it, a single one can also be used, but consult us before defining the mounting.
- How do I request a quote for a specific part number?
- Send the full part number by WhatsApp, for example 7005-B-XL-2RS-TVP, and we'll quote you shortly. If you are not sure about the suffix, send us the dimensions or the part number from another brand and we'll help you identify the equivalent FAG variant.