FAG 6234-M deep groove ball bearing
- Brand
- FAG
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read FAG 6234-M
- 62Series
- Deep groove ball bearings, 62 series. For the same bore, each series has a different outside diameter and width.
- 34Bore
- 170 mm bore: 34 × 5.
- MSuffix
- FAG suffix: it defines the variant (sealing, cage, internal clearance or other features).
6234 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The FAG 6234-M bearing has a 170 mm bore, a 310 mm outside diameter and a 52 mm width (170 x 310 x 52 mm).
FAG 6234-M is a reference of deep groove ball bearing, within Bearings. Request a quote for 6234-M via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
FAG deep groove ball bearings of the M series are single-row ball components with a brass cage, designed to withstand radial and axial loads in both directions. They are used in equipment requiring high precision and rigidity, such as electric motors, pumps and gearboxes. MR Accesorios Industriales sells this line.
The designation of these bearings combines a four-digit series number with the suffix -M, which indicates a machined brass cage. For example, 6036-M and 6040-M correspond to the 60 series, of thin section; 6232-M and 6236-M to the 62 series, of medium section; and 6328-M and 6330-M to the 63 series, of thick section. The base number defines the bore diameter and the section, while the final letter confirms the cage type.
In Argentine industry, these bearings are found in large electric motors, centrifugal pumps, industrial fans, gearboxes and machine tools. Their ability to operate at high speeds and withstand combined loads makes them suitable for continuous processes in food, cement, steel and petrochemical plants. MR Accesorios Industriales sells them for replacement and new projects.
To select the correct bearing, take into account the radial and axial load, the rotation speed and the environmental conditions. The brass cage provides greater resistance to temperature and dynamic stresses than a steel cage, so it is recommended for demanding applications. During mounting, check the alignment of the housings, the internal clearance and adequate lubrication; excess grease can raise the operating temperature.
FAG deep groove ball bearings are interchangeable with those of other brands that follow the same dimensional nomenclature. When requesting a quote, provide the complete part number with the -M suffix to ensure the brass cage. If the original equipment carries another designation, we can help you find the equivalent. Write to us on WhatsApp with the part number or model you need and we will reply shortly.
MR Accesorios Industriales sells the FAG brand as part of its bearing line. If you are looking for a deep groove ball bearing with a brass cage, send us the part number and we will quote you shortly.
Dimensions
Boundary dimensions of the basic designation 6234 per ISO 15: 170 x 310 x 52 mm (d x D x B).
- Bore
- 170mm
- Outside diameter (D)
- 310mm
- Width (B)
- 52mm
Same size in SKF and other brands
Pages from other brands with the basic designation 6234: 170 x 310 x 52 mm (d x D x B) per ISO 15.
- Looking for the SKF 6234? We also quote:6234 M6234/C36234 M/C3
- NSK6234 ZZS
- NTN6234
- RKB6234
- TIMKEN62346234MB
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the FAG 6234-M bearing?
- The FAG 6234-M bearing has a 170 mm bore, a 310 mm outside diameter and a 52 mm width (170 x 310 x 52 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 6234.
- What does the -M suffix mean on these bearings?
- The -M suffix indicates that the bearing has a machined brass cage. This cage is more resistant to high temperatures and dynamic loads than steel cages, so it is recommended for severe applications.
- How do I request a quote for an FAG M series bearing?
- Write to us on WhatsApp with the complete bearing part number, for example 6036-M or 6234-M. We will reply shortly with the quote.
- Can I replace a bearing from another brand with an FAG M series bearing?
- Yes, if the main dimensions and the cage type match. Deep groove ball bearings follow international dimensional standards, so interchangeability is possible. Ask us with the original part number and we will advise you.