Deep groove ball bearing FAG 61913-2RZ

FAG 61913-2RZ is a deep groove ball bearing reference, within Bearings. Request a quote for 61913-2RZ via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

FAG deep groove ball bearings of the 619 series with the 2RZ suffix are thin-section components with two-sided sealing. They are used to guide shafts with moderate radial and axial loads in equipment where radial space is limited. MR Accesorios Industriales supplies this official brand line for industrial and maintenance applications in Buenos Aires, Argentina.

The designation of this series reads as follows: the number 619 indicates a thin-section deep groove ball bearing series; the 2RZ suffix indicates that it comes with low-friction seals on both sides. In the examples 61909-2RZ, 61910-2RZ, 61911-2RZ, 61913-2RZ and 61914-2RZ, the last two digits before the suffix identify the bore size according to the code table. The 2RZ suffix does not change the outer dimensions: it only adds protection against contaminants and lubricant retention.

These bearings are chosen when a compact, sealed assembly is required. They appear in small electric motors, gearboxes, fans, centrifugal pumps, laboratory equipment and textile machinery. In Argentina they are found in packaging lines, compressed air transport and maintenance of rotating equipment where axial and radial space is limited. The 619 series is the thinnest section among deep groove ball bearings, which is why it is reserved for light loads and moderate to high speeds.

To select the correct bearing, take into account the shaft diameter, the type of load and the environmental conditions. The 2RZ sealing protects against dust and moisture, but it does not replace good lubrication: verify that the lubricant is compatible with the seal and with the operating temperature. During mounting, align the housings well and avoid impacts on the rings, because the thin section is more sensitive to deformation. If the equipment operates with vibration, check the internal clearance and the fit in the housing.

Regarding equivalents, deep groove ball bearings are identified by their numeric designation and sealing or clearance suffixes. Different manufacturers may use equivalent codes, but tolerances and internal clearance may vary. Therefore, when replacing a bearing, compare not only the code but also the seal type and the clearance class. If you have doubts, send us the complete code and the shaft and housing dimensions for advice.

MR Accesorios Industriales supplies FAG bearings as an official brand. If you need a quote for a 619 series bearing with 2RZ sealing, write to us on WhatsApp with the code or model you are looking for. We will reply shortly with the technical information and availability for your application.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.