Deep groove ball bearing FAG 61810-2RSR-Y

FAG 61810-2RSR-Y is a deep groove ball bearing reference, within Bearings. Request a quote for 61810-2RSR-Y via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The FAG deep groove ball bearing of the 618 series with 2RSR seals and Y cage is an extra-thin-section bearing designed to carry radial and axial loads in both directions. Its sealed construction makes it suitable for environments with dust or moderate humidity, and its reduced thickness allows it to be integrated into compact housings where axial space is limited. MR Accesorios Industriales supplies this line as an official brand, with technical advice to select the right size.

The designation of these bearings is read in parts. The basic number, such as 61809, identifies the size and series: the higher the number, the larger the bore diameter. The suffix 2RSR indicates double elastomer seals on both sides, which retain lubrication and block the entry of contaminants. The letter Y corresponds to a sheet steel cage, suitable for moderate-speed applications. Thus, a 61810-2RSR-Y is a bearing of the 618 series, sealed on both sides and with a standard cage.

In Argentine industry, these bearings appear in equipment where radial and axial space is critical: small electric motors, precision gearboxes, instrumentation, textile machines, medical equipment and automation devices. They are also found in fans, low-power centrifugal pumps and light transmission mechanisms. Their ability to run at high speeds with low noise makes them common in applications that demand smooth rotation and reliability, such as test benches and laboratory equipment.

To select the right bearing, take into account the radial and axial load it must carry, the rotation speed and the environmental conditions. The 2RSR seal is convenient when there is dust, chips or humidity, but if lower friction or higher speed is required, an open or shielded variant may be chosen. During mounting, check the alignment between shaft and housing, avoid direct blows on the balls and make sure the fit is correct so as not to deform the rings. Lubrication is retained by the seals, so no additional maintenance is required in normal service.

When replacing a bearing, it is common to find equivalences between brands: the same size may be offered with different nomenclatures depending on the manufacturer. What matters is respecting the main dimensions (bore, outer diameter and width) and the type of seal. If the original part number is not available, it can be searched by dimensions or by the letters that indicate the seal and cage. At MR Accesorios Industriales we can guide you to find the right alternative within the brands we supply.

If you need a quote for a FAG deep groove ball bearing of the 618 series with 2RSR seals and Y cage, write to us on WhatsApp with the full part number or the equipment dimensions. We will reply shortly with availability and compatible options. MR Accesorios Industriales, with more than 80 years in the industry, supports you in the selection and supply of components for your equipment.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.