FAG 51326-MP thrust ball bearing
- Brand
- FAG
- Category
- Bearings
- Subcategory
- Thrust ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read FAG 51326-MP
- 513Series
- Thrust ball bearings, 513 series. For the same bore, each series has a different outside diameter and width.
- 26Bore
- 130 mm bore: 26 × 5.
- MPSuffix
- FAG suffix: it defines the variant (sealing, cage, internal clearance or other features).
51326 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The FAG 51326-MP bearing has a 130 mm bore, a 225 mm outside diameter and a 75 mm height (130 x 225 x 75 mm).
FAG 51326-MP is a reference of thrust ball bearing, within Bearings. Request a quote for 51326-MP via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The FAG MP series thrust ball bearing is a component designed to support predominantly axial loads in one direction. Its design with balls and flat rings suits applications requiring high load capacity and rigidity. MR Accesorios Industriales carries this series as part of its bearing line.
The MP series designation consists of a five-digit number indicating size and load capacity, followed by the MP suffix. For example, 51130-MP, 51132-MP and 51134-MP correspond to single-direction thrust ball bearings. The MP suffix indicates a machined brass cage, suitable for demanding applications. This nomenclature allows quick identification of size and main characteristics.
These bearings are used in applications where axial loads are predominant, such as gearboxes, pumps, compressors, machine tools and lifting equipment. In Argentine industry, they are common in the metalworking, food and petrochemical sectors. Their ability to support unidirectional loads makes them ideal for assemblies requiring precision and axial rigidity.
To select the right thrust ball bearing, take into account the axial load, rotational speed and environmental conditions. It is essential to verify ring alignment and ensure proper lubrication, whether with grease or oil. Mounting must be done with appropriate tools to avoid damaging the raceways. The MP brass cage offers good strength and heat dissipation.
Regarding equivalences, thrust ball bearings from other brands may have similar designations, but it is important to verify dimensions and tolerances. Interchangeability between brands is not always direct; consulting a specialist is recommended. MR Accesorios Industriales can advise you to find the best option for your application.
If you need a quote for an FAG MP series thrust ball bearing, send the part number via WhatsApp to MR Accesorios Industriales. Our technical team will respond promptly with the information needed for your requirement.
Dimensions
Boundary dimensions of the basic designation 51326 per ISO 104: 130 x 225 x 75 mm (d x D x H).
- Bore
- 130mm
- Outside diameter (D)
- 225mm
- Height (H)
- 75mm
Same size in SKF and other brands
Pages from other brands with the basic designation 51326: 130 x 225 x 75 mm (d x D x H) per ISO 104.
They share the boundary dimensions set by ISO 104, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the FAG 51326-MP bearing?
- The FAG 51326-MP bearing has a 130 mm bore, a 225 mm outside diameter and a 75 mm height (130 x 225 x 75 mm). These are the standardised boundary dimensions (ISO 104) of the basic designation 51326.
- What does the MP suffix mean in the designation?
- The MP suffix indicates that the bearing incorporates a machined brass cage, giving it greater strength and capacity for high-load and high-speed applications. It is a quality hallmark of the series.
- How do I choose the correct thrust bearing size?
- You should consider the axial load it will support, the shaft diameter and the housing dimensions. With that data, we can advise you to select the right part number within the MP series.
- Are FAG MP series thrust ball bearings interchangeable with other brands?
- Dimensional equivalents may exist, but interchangeability is not automatic. It is advisable to verify the tolerances and characteristics of each manufacturer. Consult us with the part number and we will help you find the right option.