Product page
Radial shaft seals FAG 32332
- Manufacturer Part Number
- 32332
- Brand
- FAGOfficial brand
- Category
- Seals
- Subcategory
- Radial shaft seals
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
FAG 32332 is a radial shaft seal reference, within Seals. Request a quote for 32332 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
FAG radial shaft seals are sealing elements that prevent lubricant leakage and the ingress of contaminants in equipment with rotating shafts. They are mounted in gearboxes, pumps, electric motors and a wide variety of industrial machines. MR Accesorios Industriales sells this line as an official brand, with advice to identify the correct size according to the housing and shaft.
The designation of FAG seals usually combines letters and numbers that indicate the design type and dimensions. For example, code 32332 corresponds to a single-lip seal with spring, and its final digits refer to the shaft and housing dimensions. To choose the correct one, it is essential to read the complete code and compare it with the actual mounting dimensions.
In Argentine industry, FAG radial shaft seals are used in gearboxes, centrifugal pumps, electric motors, machine tools and transmission equipment. They are also present in the food, chemical and petrochemical industries, where sealing prevents lubricant loss and protects bearings from dust and moisture.
To select a seal, take into account the shaft diameter, outer diameter and width, as well as the lip type and material. Installation requires cleaning the housing, lubricating the lip and checking alignment to avoid damaging it. Peripheral speed and operating temperature determine the choice of compound, which can be nitrile rubber, Viton or polyurethane.
Radial shaft seals from different brands can be interchanged if the dimensions and lip type match. However, each manufacturer may have variations in lip design or material. It is always advisable to verify equivalence with the original code and consult a specialist before replacing a part.
If you need an FAG radial shaft seal, send the code or dimensions via WhatsApp to MR Accesorios Industriales. Our technical team helps you identify the correct part and responds promptly.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- How do I identify the radial shaft seal I need?
- Measure the shaft diameter, housing outer diameter and width. With those dimensions and the code engraved on the seal, we can find the equivalent reference. If you don't have the code, send us a photo and the dimensions via WhatsApp.
- What is the difference between a seal with spring and one without spring?
- The spring keeps the lip in contact with the shaft, which improves sealing at low speeds or with low-viscosity lubricants. Seals without spring are used in less demanding applications. The choice depends on the operating conditions.
- Can FAG seals be replaced by those of another brand?
- Yes, as long as the dimensions and lip type match. However, there may be differences in material or design that affect performance. Consult us with the original code and we will advise you on the appropriate equivalence.