FAG 3203-BD-XL-2HRS-TVH angular contact ball bearing

FAG 3203-BD-XL-2HRS-TVH is a reference of angular contact ball bearing, within Bearings. Request a quote for 3203-BD-XL-2HRS-TVH via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

FAG 32..-BD series angular contact bearings are ball bearings with raceways that support combined radial and axial loads in one direction. They are used in applications where a shaft must be guided precisely and moderate axial forces transmitted, such as gearboxes, pumps, fans or machine tools. MR Accesorios Industriales sells this line, with technical advice to choose the right part number.

The designation of this series is read as follows: the basic number (3202, 3203, 3204, etc.) indicates the size and load capacity; the BD suffix identifies the single row angular contact design with modified raceways; XL indicates the optimized cage design and surface treatment; 2HRS corresponds to the double-lip seal on both sides, which retains lubrication and blocks the entry of contaminants; and TVH designates the glass fiber reinforced polyamide cage, ball-guided. Part numbers such as 3205-BD-XL-2HRS-TVH or 3208-BD-XL-2HRS-TVH combine all these elements.

In Argentine industry, these bearings appear in transmission equipment, centrifugal pumps, industrial fans, screw compressors, food industry machinery and packaging lines. They are also found in agricultural applications, such as seeders and combine harvesters, where dust and moisture demand effective sealing. Being angular contact, they are normally mounted in pairs, face-to-face or matched, to absorb axial loads in both directions and give rigidity to the assembly.

To select the correct part number, take into account the direction of the axial load, the internal clearance and the type of sealing. The 2HRS design is already lubricated at the factory and requires no additional maintenance in most cases; if the environment is very aggressive, external protections should be evaluated. During mounting, respect the alignment of the shaft and the housing, avoid impacts on the raceway edges and use suitable mounting tools. The TVH cage handles the usual accelerations and operating temperatures well.

If you need to replace a bearing from another brand, interchangeability is defined by the main dimensions and the type of design. An angular contact part number with sealing and polyamide cage may be equivalent to other nomenclatures, but always verify the bore diameter, outside diameter, width and contact angle before replacing. At MR Accesorios Industriales we can advise you on the equivalence based on the original part number or the equipment dimensions.

To request a quote, send us via WhatsApp the complete part number shown on the bearing or in the machine manual, for example 3206-BD-XL-2HRS-TVH. If you do not have it at hand, send us the shaft and housing dimensions and the type of application. We will reply shortly with the corresponding reference and mounting recommendations.