Angular contact ball bearing FAG 3002-B-2RZ-TVH

FAG 3002-B-2RZ-TVH is a angular contact ball bearing reference, within Bearings. Request a quote for 3002-B-2RZ-TVH via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

FAG B-2RZ-TVH series angular contact bearings are ball bearings with raceways designed to support combined radial and axial loads in one direction. Their sealed design on both sides and their polyamide cage make them suitable for applications requiring low maintenance and protection against contaminants. They are used in pumps, compressors, fans and transmission equipment operating at moderate and high speeds. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, and advises you to choose the correct part number.

The series designation is read in blocks: the base number identifies the bearing size (for example, 3000, 3001, 3002, etc., which in practice correspond to standardized shaft diameters). The suffix B indicates a 40° contact angle, suitable for moderate axial loads. Then, 2RZ indicates that the bearing has low-friction seals on both sides, which retains lubricant and blocks dust ingress. Finally, TVH describes the glass fiber reinforced polyamide cage, ball-centered. Thus, a part number such as 3005-B-2RZ-TVH is interpreted as a bearing of the 3005 series, with B angle, double seal and TVH cage.

These bearings are used in the food and beverage, chemical, petrochemical and water treatment industries, among others. In Argentina they are commonly found in centrifugal pumps, screw compressors, industrial fans, gearboxes and machine tools. Their ability to support combined loads makes them useful in transmission shafts with helical gears or belts, where axial forces appear. They are also used in packaging and conveying equipment, where cleanliness and low heat generation are important.

To select correctly, take into account the direction of the axial load: being single-row angular contact, they support thrust in one direction only, so they are usually mounted in pairs (tandem, back-to-back or face-to-face) to cover both directions. The 2RZ seal is already lubricated from the factory, so it does not require additional greasing in most cases; if the environment is very humid or has vapors, consider a more robust seal. The TVH cage tolerates moderate operating temperatures. During mounting, it is key to align the supports well and apply the axial clearance recommended by the manufacturer to avoid excessive preload.

When looking for equivalents, angular contact bearings are identified by their complete designation, which includes series, angle, seal and cage. Different manufacturers may use their own nomenclature, but dimensional codes usually match. If you need to replace an existing bearing, the safest is to compare the main dimensions (bore, outer diameter and width) and the seal type. Do not invent part numbers: with the number engraved on the bearing or the shaft size, we can guide you. MR Accesorios Industriales sells the FAG brand and can offer you equivalent alternatives.

If you already have the part number or model of the bearing you need, write to us via WhatsApp and we will quote you promptly. At MR Accesorios Industriales we work with stock from the main brands and help you find the best option for your application. Do not hesitate to ask us about variants, quantities or technical advice.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.