Product page
Spherical roller bearing FAG 241/560-BEA-XL-K30-MB1
- Manufacturer Part Number
- 241/560-BEA-XL-K30-MB1
- Brand
- FAGOfficial brand
- Category
- Bearings
- Subcategory
- Spherical roller bearings
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
FAG 241/560-BEA-XL-K30-MB1 is a spherical roller bearing reference, within Bearings. Request a quote for 241/560-BEA-XL-K30-MB1 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
FAG spherical roller bearings are self-aligning double-row components designed to withstand high radial loads and axial loads in both directions, even with misaligned shafts. They are used in heavy equipment where shaft deflection or mounting errors are common. MR Accesorios Industriales supplies this line with technical advice so you can choose the correct design for your application.
The designation of this series is read in blocks. The base number, as in 240/500, indicates the type and main dimension; the suffix BEA defines the internal design with brass cage and special machining; XL indicates the high load capacity design; K30 specifies a tapered bore with 1:30 taper; and MB1 identifies the brass cage guided by the inner ring. Thus, a 240/560-BEA-XL-K30-MB1 combines all these features in a single reference.
These bearings are used in core industries: steel, cement, mining, paper, cranes and power transmission. In Argentina you find them in gearboxes, mills, screens, heavy fans and material handling equipment. Their ability to absorb misalignment makes them ideal for assemblies where perfect alignment between supports cannot be guaranteed.
To select correctly, take into account the radial and axial load, the rotational speed and the type of lubrication. The K30 tapered bore requires a suitable adapter sleeve to achieve the necessary interference fit. Check the sealing: if the environment has dust or moisture, choose sealed designs. Lubrication must be as specified by the manufacturer and mounting must be done with appropriate tools to avoid damaging the rollers.
Regarding equivalences, spherical roller bearings are available from different brands under similar but not identical nomenclatures. Dimensional interchangeability follows international standards, although suffixes may vary. Always confirm the complete part number and service conditions before replacing one bearing with another from a different manufacturer.
If you need a FAG spherical roller bearing, write to us on WhatsApp with the part number or the dimensions of your equipment. At MR Accesorios Industriales we advise you so you receive the correct reference and we coordinate the quote promptly.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- What does the K30 suffix mean on these bearings?
- K30 indicates that the bore is tapered with a 1:30 taper. This allows mounting on an adapter sleeve or tapered shaft to achieve a controlled interference fit. It is important to use the appropriate sleeve and follow the recommended mounting procedure.
- How do I know if I need a bearing with a brass cage?
- The brass cage, identified by the MB1 suffix, is used in applications with high loads, high speeds or severe conditions. It offers greater strength and guidance than steel cages. If your original equipment comes with this design, it is advisable to keep it to avoid compromising performance.
- Can I replace a FAG bearing with another brand?
- Yes, as long as the dimensions and load capacity are equivalent. International standards guarantee dimensional interchangeability, but suffixes may differ between manufacturers. We recommend verifying the complete part number and consulting us to confirm the equivalence before purchasing.