Self-aligning ball bearing FAG 2310-2RS-TVH

FAG 2310-2RS-TVH is a self-aligning ball bearing reference, within Bearings. Request a quote for 2310-2RS-TVH via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

FAG self-aligning ball bearings of the 22..-2RS-TVH series are self-aligning bearings with two rows of balls and a spherical raceway in the outer ring. This geometry allows them to compensate for angular misalignment between shaft and housing, even during operation. They feature elastomer seals on both sides and a polyamide cage. They are used in equipment where alignment is not perfect or the shaft may flex, such as fans, pumps, conveyors and agricultural machinery.

The series designation is read as follows: the base number identifies the size, and the suffixes indicate design features. In 2200-2RS-TVH, 2201-2RS-TVH or 2205-2RS-TVH, the prefix 22 corresponds to the reduced outside diameter series. The suffix 2RS indicates elastomer seals on both sides, which retain lubrication and block contaminants. TVH designates the glass fiber reinforced polyamide cage, suitable for the usual speeds of this series. Recognizing these suffixes is key to ordering the correct part number.

In Argentine industry, these bearings appear in centrifugal and axial fans, centrifugal pumps, belt conveyors, mixers, screens and agricultural equipment. They are also found in textile machines, bottling plants and air handling equipment. Their self-aligning capability makes them useful when the shaft is long and may flex, or when the housing does not guarantee perfect alignment. MR Accesorios Industriales supplies this FAG line for replacement and projects in plants in Buenos Aires and the rest of the country.

To select the bearing, take into account radial and axial load, rotational speed and the working environment. The 22 series accommodates moderate radial loads and some axial load in both directions. The 2RS seal is suitable for environments with dust or moderate humidity; if there is exposure to water or fine particles, it is advisable to evaluate more robust seals or a protected housing. During mounting, check initial alignment and avoid striking the rings. Factory lubrication is sufficient for most applications; under severe conditions, periodic relubrication may be required.

Self-aligning bearings of this series have equivalents with products from other brands that use similar designations: 22.. series with suffixes indicating sealing and cage type. In the local market it is common to find equivalent part numbers from SKF, NSK, NTN or SNR. Dimensional interchangeability is usually direct, but always verify the seal type and cage, because they affect performance. If you have doubts, consult us with the original part number and we will advise you.

To request a quote for FAG bearings of the 22..-2RS-TVH series, write to us on WhatsApp with the complete part number or the shaft and housing dimensions. At MR Accesorios Industriales we respond promptly with availability and the alternatives that best suit your equipment. We can also advise you on mounting, lubrication and equivalent replacements.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.