FAG 2205-2RS-TVH self-aligning ball bearing

FAG 2205-2RS-TVH is a reference of self-aligning ball bearing, within Bearings. Request a quote for 2205-2RS-TVH via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

FAG self-aligning ball bearings of the 22..-2RS-TVH series are self-aligning bearings with two rows of balls and a spherical raceway in the outer ring. This geometry allows them to compensate for angular misalignment of the shaft relative to the housing, even during operation. They incorporate elastomer seals on both sides and a polyamide cage. They are used in equipment where alignment is not perfect or the shaft may flex, such as fans, pumps, conveyors and agricultural machinery.

The series designation is read as follows: the base number identifies the size, and the suffixes indicate design features. The prefix 22 corresponds to the reduced outside diameter series. The suffix 2RS indicates elastomer seals on both sides, which retain lubrication and block contaminants. TVH designates the glass fiber reinforced polyamide cage, suitable for the usual speeds of this series. Recognizing these suffixes is key to ordering the correct part number.

In Argentine industry, these bearings appear in centrifugal and axial fans, centrifugal pumps, belt conveyors, mixers, screens and agricultural equipment. They are also found in textile machines, bottling plants and air treatment equipment. Their self-aligning capability makes them useful when the shaft is long and may flex, or when the support does not guarantee perfect alignment. MR Accesorios Industriales sells this FAG line for replacement and projects in plants in Buenos Aires, Argentina and the rest of the country.

To select the bearing, take into account the radial and axial load, the rotation speed and the working environment. The 22 series accepts moderate radial loads and some axial load in both directions. The 2RS sealing is suitable for environments with dust or moderate humidity; if there is exposure to water or fine particles, it is advisable to evaluate more robust seals or a protected housing. When mounting, check the initial alignment and avoid striking the rings. Factory lubrication is sufficient for most applications; under severe conditions, periodic relubrication may be required.

Self-aligning bearings of this series have equivalents with products from other brands that use similar designations: 22.. series with suffixes indicating sealing and cage type. In the local market it is common to find equivalent part numbers from SKF, NSK, NTN or SNR. Dimensional interchangeability is usually direct, but always verify the seal type and the cage, because they affect performance. If you have doubts, contact us with the original part number and we will advise you.

To request a quote for FAG bearings of the 22..-2RS-TVH series, write to us on WhatsApp with the complete part number or the shaft and housing dimensions. At MR Accesorios Industriales we reply shortly with availability and the alternatives that best suit your equipment. We can also advise you on mounting, lubrication and equivalent replacements.