DONGHUA ASA 410 roller chain

DONGHUA ASA 410 is a reference of roller chain, within Power transmission. Request a quote for ASA 410 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The ASA 410 chain is a roller chain with a 12.7 mm (half-inch) pitch used to transmit motion between parallel shafts in industrial equipment. Its 7.77 mm diameter roller and 3.6 mm inner width make it suitable for tight spaces. DONGHUA is a brand MR sells, with technical support to select the right chain for your application.

This item is an ASA 410 roller chain from DONGHUA. Its pitch is 12.7 mm, the roller diameter is 7.77 mm and the inner width is 3.6 mm. The ASA 410 designation corresponds to the 40 series with a 1/2 inch pitch, single strand. It is manufactured under the ASA/ANSI standard, which guarantees dimensional compatibility with sprockets of the same standard. It is a power transmission chain for moderate loads and medium speeds.

It is used in chain drives for agricultural machinery, light conveyors, packaging equipment, machine tools and drive systems in general. It also appears in applications where shafts must be synchronized over a short distance. Due to its pitch and strength, it is common in equipment that originally came with an ASA 40 chain. If your equipment uses this pitch, the ASA 410 is the direct option.

To install it, check that the sprockets have the correct pitch and that the number of teeth is compatible with the desired transmission ratio. Check shaft alignment and chain tension: it should have a slight sag. Lubricate according to the operating conditions. If the chain works in a dusty or humid environment, choose the right lubricant and check wear periodically.

To quote an equivalent, send us the full part number and the measurements shown on the equipment's nameplate or in the manual. You can also send us a photo of the chain and the sprocket. With that data we will tell you whether the ASA 410 is the right one or the corresponding designation from the same series. Do not guess measurements: the chain must match in pitch and width.

To request a quote for the DONGHUA ASA 410 chain, send the part number by WhatsApp to MR Accesorios Industriales. If you have doubts about the application, our technical team helps you confirm that it is the right chain for your machine. We can also advise you on compatible sprockets and lubricants. Write to us and we will reply with the information you need to move forward.