Take-up bearing DODGE WSTU-SXRAG-200L

DODGE WSTU-SXRAG-200L is a take-up bearing reference, within Bearing housings. Request a quote for WSTU-SXRAG-200L via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The Dodge SXR AG series tensioner unit is a mounted unit that combines an insert bearing with a tensioner housing, designed to maintain correct tension in chain or belt drives. It is used when the run needs an adjustable support point that follows movement and absorbs minor misalignments. MR Accesorios Industriales supplies this Dodge line in Buenos Aires, Argentina, with technical advice to choose the right configuration according to the type of mounting and the working environment.

The SXR AG series designation is read in blocks: the letters identify the family of tensioner unit with insert bearing, and the number following the hyphens indicates the nominal shaft diameter in inches, expressed in eighths. For example, WSTU-SXRAG-200L corresponds to a 2-inch shaft. The final suffix L indicates a construction variant within the same series, generally linked to the type of seal or the housing material. To correctly interpret each part number, consult the manufacturer's dimension table or send us the complete part number via WhatsApp.

These tensioner units are used in chain conveyors, bucket elevators, belt conveyors and belt drive systems where tension needs to be regulated. In Argentine industry they appear in food, cement, mining, grain processing plants and in packaging lines. Their function is to keep the run tight to prevent chain jumping or belt slipping, while at the same time allowing small alignment adjustments during mounting or maintenance.

To select the right tensioner unit, take into account the shaft diameter, the type of mounting to the frame and the environmental conditions. The insert bearing seal defines the protection against dust, water or chemical agents: in humid environments or with frequent washdowns, reinforced protection is advisable. Lubrication must be as specified by the manufacturer and mounting requires aligning the unit with the drive run to avoid lateral loads. A misaligned tensioner shortens the life of the bearing and the chain.

Dodge SXR AG series tensioner units can be interchanged with units from other manufacturers that share the same shaft diameter and the same mounting pattern. Equivalences are established by mounting dimensions and load capacity, not by the commercial part number. If you need to replace an existing unit, send us the part number stamped on the housing or the shaft and mounting hole dimensions: at MR Accesorios Industriales we will indicate the compatible alternative.

MR Accesorios Industriales supplies the Dodge line of tensioner units in Buenos Aires, Argentina. If your equipment requires a tensioner for chain or belt, write to us via WhatsApp with the part number WSTU-SXRAG-200L or with the shaft and mounting dimensions. We will quote you promptly and advise you so that the unit works correctly from the first day.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.