DODGE WSTU-SXR-200-NL take-up bearing

DODGE WSTU-SXR-200-NL is a reference of take-up bearing, within Bearing housings. Request a quote for WSTU-SXR-200-NL via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The WSTU-SXR-NL take-up frame from DODGE is a mounted bearing with a take-up housing, designed to maintain correct tension in belt or chain drives. The SXR series corresponds to the line of insert bearings with stamped steel housing, which allows position adjustment through a sliding mechanism. It is used in applications where tension must be adjusted frequently or where the shaft is not precisely aligned. MR Accesorios Industriales sells this brand and advises you on choosing the right model.

The designation WSTU-SXR-NL is interpreted as follows: WSTU identifies the take-up frame type with insert bearing; SXR is the insert series, which defines the shaft diameter and main dimensions; the number that follows indicates the nominal shaft diameter in inches or millimeters according to the series convention; and NL indicates a construction variant, generally associated with the sealing type or the housing material. To choose the correct part number, have the shaft diameter and mounting type on hand.

These take-up frames are used in industries such as food, textile, wood and metallurgical, where drive lines require periodic tension adjustments. They also appear in conveyors, fans, mixers and pumping equipment. In Argentina, they are commonly found in processing plants and in workshops that assemble or repair machinery with belt drives. Their design compensates for the natural stretching of the belt or chain and maintains system performance.

To select the frame, verify the shaft diameter and the tension range required by the drive. Mounting requires aligning the take-up with the belt or chain and securing it firmly to the base. Lubrication of the insert is permanent in most cases, but it is advisable to check the sealing if the environment has dust or moisture. The SXR series tolerates some angular misalignment, which simplifies installation. Follow the manufacturer's instructions for tensioning and fastening.

DODGE mounted bearings are interchangeable with those of other brands that follow the same basic dimensions and the same housing type. If you need to replace an existing frame, compare the shaft diameter, the distance between mounting centers and the sealing type. In many cases, an equivalent part number from another brand may work, but always verify the critical dimensions. MR Accesorios Industriales helps you find the compatible alternative without compromising operation.

If you already have the frame part number or the equipment model, send it to us on WhatsApp and we will quote it promptly. We can also advise you if you need a variant with a different shaft diameter or a different sealing type. At MR Accesorios Industriales we work with DODGE. Write to us and we will give you a technical and commercial response.