Take-up bearing DODGE WSTU-SCEZ-35M-PSS

DODGE WSTU-SCEZ-35M-PSS is a take-up bearing reference, within Bearing housings. Request a quote for WSTU-SCEZ-35M-PSS via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SCEZ PSS Y-bearing take-up unit is a mounted take-up unit: it combines an insert ball bearing with a cast iron split housing, ready to mount on the shaft and fix to the structure. It is used to guide and tension shafts in conveyors, belts and drive equipment, where a robust, self-aligning unit that is easy to replace is required. MR Accesorios Industriales supplies this line with technical advice to choose the right size.

The SCEZ PSS series designation is read in blocks: WSTU identifies the housing type and its mounting configuration, SCEZ corresponds to the insert bearing series, and the number that follows — as in WSTU-SCEZ-20M-PSS or WSTU-SCEZ-35M-PSS — indicates the nominal shaft size. The suffix M indicates the variant for fixing the insert to the shaft, and PSS defines the sealing and the service conditions intended for the unit. These four examples cover the most requested sizes in this series.

These units are found in food and beverage plants, material handling, packaging lines, aggregate processing equipment and package handling systems. In Argentina they appear in belt conveyors, bucket elevators, mixers, dryers and agricultural machinery, where the environment often has dust, humidity or frequent washdowns. The Y-bearing housing allows shaft alignment with normal mounting tolerances and absorbs small misalignments without requiring special machining on the structure.

To select the unit, start from the shaft diameter and confirm that the housing has the bolt hole spacing and center height compatible with the base. Check the sealing type according to the environment: in areas with water or fine dust, the reinforced sealing identified by the PSS suffix is recommended. During mounting, clean the shaft seat, verify that the insert is properly fixed and lubricate according to the operating conditions. Base alignment and even bolt tightening prevent parasitic loads and extend bearing life.

Mounted units are interchangeable between manufacturers by part number and shaft size, but center height, bolt hole spacing and fixing type do not always match. Before replacing a unit, compare these dimensions and the sealing system; if space allows, an equivalent unit from another brand may work, although it is advisable to verify the interface with the shaft and the base. MR Accesorios Industriales will indicate the compatible alternative when the original code is not available.

If you need to replace a unit or set up a new series, send the complete code via WhatsApp — for example WSTU-SCEZ-25M-PSS — or the shaft size and housing dimensions. At MR Accesorios Industriales we quote the DODGE reference and, if necessary, offer the alternative that best suits your equipment. More than 80 years supporting Argentine industry with housings, bearings and power transmission.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.