DODGE WSTU-SCEZ-104S-PSS take-up bearing
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SCEZ PSS
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DODGE WSTU-SCEZ-104S-PSS is a reference of take-up bearing, within Bearing housings. Request a quote for WSTU-SCEZ-104S-PSS via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The Dodge SCEZ PSS series Y-bearing with insert bearing is a take-up mounted bearing designed to guide and tension shafts in belt drives and other systems where the shaft position must be adjusted. MR Accesorios Industriales carries this line as a brand in Buenos Aires, Argentina, and quotes it by WhatsApp based on the complete part number.
The series designation is read in blocks: the initial letters identify the housing family and its mounting configuration, the SCEZ segment corresponds to the insert bearing series, and the middle number indicates the shaft size. The final suffixes indicate construction variants of the assembly, such as the sealing type or the insert treatment. One example from the series is WSTU-SCEZ-104S-PSS: that complete part number is the one you should send to get an unambiguous quote.
These take-up housings are used in belt conveyors, sorting belts, packaging lines, mills and process equipment where the belt or chain needs periodic tensioning. In Argentine plants they also appear in blowers, exhaust fans and agricultural machinery. The advantage of the take-up mounting is that it allows you to correct tension and absorb small alignment variations without disassembling the entire drive, which is key in equipment that runs many hours a day.
To choose the right housing, check the shaft diameter required by the equipment and the mounting type of the take-up housing. Check the insert sealing: in environments with dust, water or frequent washdown, reinforced protection is advisable. During installation, seat the housing on a flat, rigid base, align the shaft with the drive and adjust the tension before final tightening. Lubricate the insert according to the duty cycle and check the radial clearance if the equipment is vibrating.
Mounted bearings are interchanged between manufacturers by series number and shaft size, not by brand. The equivalent is found by dimensions and mounting configuration, respecting the sealing type and the shaft locking system. In many cases the complete housing is replaced and the insert is kept, or vice versa, depending on wear. For that, it helps to have the part number stamped on the part and the shaft dimensions on hand.
If you need this take-up housing or a variant of the SCEZ PSS series, send the complete part number by WhatsApp to MR Accesorios Industriales. We'll send you a quote shortly and, if you're looking for another mounting or sealing configuration, we'll point you to the alternative compatible with your equipment.
Dimensions
- Número de producto
- 136737
- Bore
- 1-1/4 in
Frequently Asked Questions
- How do I request a quote for a Dodge SCEZ PSS housing?
- Send us by WhatsApp the complete part number shown on the part or on the equipment drawing, for example the one from the series with its shaft number and suffixes. With that we'll send you a quote shortly and point you to the alternative if you need another variant.
- What is the difference between the housing and the insert bearing?
- The housing is the body that is fixed to the structure and allows tensioning; the insert is the bearing that rotates on the shaft. They can be replaced separately depending on wear, but it is advisable to verify that the combination maintains the original sealing and locking.
- How do I choose the right sealing for my application?
- It depends on the environment: in areas with coarse dust or water, reinforced sealing is advisable, and in clean applications standard protection is enough. Tell us where the equipment operates and we'll guide you on the series variant that fits best.