Take-up bearing DODGE WSTU-DL-215

DODGE WSTU-DL-215 is a take-up bearing reference, within Bearing housings. Request a quote for WSTU-DL-215 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE DLM series Y-bearing bracket with insert is a mounted unit that combines a ball insert bearing with a cast iron or stamped steel bracket, ready to install on shafts and structures. It is used to guide and support rotating shafts in power transmission equipment, with the advantage of coming pre-assembled and aligned from the factory. MR Accesorios Industriales sells this DODGE line in Buenos Aires, Argentina, with more than 80 years of experience in industrial distribution.

The WSTU-DL-# designation is read as follows: WSTU identifies the bracket type and its mounting configuration, DL corresponds to the DLM series of insert bearings, and the final number indicates the nominal shaft diameter in inches or its metric equivalent. For example, WSTU-DL-012 and WSTU-DL-014 are sizes for shafts of different dimensions, while WSTU-DL-100 and WSTU-DL-102 cover other variants of the same series. The DLM series and the D-Lok locking system are part of the DODGE mounted bearing family.

These brackets are used in belt conveyors, bucket elevators, mixers, mills, pumps, fans and process equipment in the food, chemical, cement and material handling industries. In Argentina they are found in balanced feed plants, meatpacking plants, tanneries and aggregate processing plants, where the mounted unit simplifies maintenance and reduces downtime. The housing allows the bracket to be fastened to the structure with bolts, and the insert rotates on the shaft transmitting the radial load.

To select the correct bracket, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The insert sealing protects against dust, water and contaminants; in humid environments or with frequent washdowns, it is advisable to verify the type of seal. Proper lubrication and alignment of the bracket with the shaft are key to avoiding premature wear. Mounting is done by sliding the insert onto the shaft and locking it with the set screws or the D-Lok locking system, as applicable.

As for equivalences, DODGE DLM series mounted bearings can be interchanged with other brands that offer Y-brackets with inserts of standardized dimensions, provided the shaft diameter, the distance between mounting centers and the type of locking match. These are not identical part numbers, but compatible alternatives that must be verified case by case. MR Accesorios Industriales will indicate the compatible alternative if you need to replace an existing unit.

To request a quote for the DODGE Y-bearing bracket with insert you need, send the complete part number by WhatsApp to MR Accesorios Industriales. If you cannot find the exact variant, write to us with the model or the shaft measurements and we will quote you promptly. We can also advise you on the installation and maintenance of these mounted units.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.