Pillow block bearing DODGE TBSO-SCFS-35M-SHFS

DODGE TBSO-SCFS-35M-SHFS is a pillow block bearing reference, within Bearing housings. Request a quote for TBSO-SCFS-35M-SHFS via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SCFS series pillow block with insert bearing is a mounted unit that combines a cast iron housing with an insert ball bearing, already lubricated and sealed. It is used to support rotating shafts in equipment where a compact, self-aligning unit with simple mounting is required. MR Accesorios Industriales supplies this DODGE line in Buenos Aires, Argentina, and advises you on choosing the right size for your shaft.

The SCFS series designation is read in parts: SCFS identifies the family of pillow blocks with insert bearing; the number that follows —20M, 25M, 30M, 35M or 40M— indicates the nominal shaft size, and the SHFS suffix corresponds to the type of insert and sealing the unit comes with. So a TBSO-SCFS-25M-SHFS is a pillow block for a 25 mm shaft with an SHFS insert. If your part number has a different ending, send it to us and we will tell you the equivalent variant.

These pillow blocks appear in conveyors, belts, elevators, mixers, mills, pumps and fans. In food, chemical and aggregate plants they are chosen for their robust housing and their ability to absorb slight shaft misalignment. They are also used in bottling, water treatment and material handling equipment, where quick mounting and easy relubrication simplify maintenance. MR Accesorios Industriales supplies them in Buenos Aires, Argentina, throughout the country.

To select the pillow block, start from the shaft diameter you need and check the mounting type: the SCFS series is mounted with two bolts on a flat base. Check that the insert has the right sealing for the environment: dust, water or frequent washdowns require tighter seals. The self-alignment of the unit compensates for small misalignments, but it is best to align the base well so as not to load the bearing. Lubricate according to the duty cycle and check axial clearance if the shaft expands.

Pillow blocks with insert bearing are interchangeable between brands by shaft size and housing type, but the center height, hole spacing and insert locking system do not always match. Before replacing a unit, compare those dimensions and the sealing type. If space is critical, it is best to verify the distance between holes and the overall height. With that data, at MR we will tell you the compatible alternative within the lines we supply.

If you already have the pillow block part number —for example TBSO-SCFS-30M-SHFS— send it on WhatsApp along with the shaft diameter and a photo of the installation. That way we can quote the exact reference or its equivalent and confirm availability of the DODGE SCFS series. We can also advise you on the most suitable insert and sealing for your application. Write to us and we will reply shortly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.