DODGE TB-SXR-203 pillow block bearing

DODGE TB-SXR-203 is a reference of pillow block bearing, within Bearing housings. Request a quote for TB-SXR-203 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE SXR series Y-bearing insert unit is a pillow block mounted unit that combines an insert bearing with a cast iron housing. It is used to support rotating shafts in equipment where simple alignment and fastening are required. MR Accesorios Industriales sells this line, with sizes for different shaft diameters. If you need to replace an existing unit, send the part number on WhatsApp and we will quote it for you.

The SXR series designation is read from the complete part number: TB-SXR- followed by a number that identifies the size. For example, part numbers with three digits correspond to the smaller sizes, while part numbers with three digits cover the intermediate ones. The numeric suffix does not indicate the diameter directly, but rather the combination of housing and insert bearing. To choose the correct unit, compare the part number with the one on the equipment or ask us with the shaft size.

These housings are used in conveyors, belts, elevators, mixers, mills and process equipment in food, chemical and materials plants. In Argentina they are common in the oilseed, meatpacking and aggregate processing industries. The pillow block unit allows the shaft to be mounted on a flat base and absorbs moderate radial and axial loads. Being a sealed unit, it requires little maintenance and withstands dusty or humid environments if the right sealing is chosen.

To select the unit, take into account the shaft diameter, the type of load and the environmental conditions. Check that the housing sits well on the base and that the fastening bolts are tightened without deforming the cast iron. Lubrication comes from the factory, but in demanding applications it is advisable to check the condition of the sealing and the working temperature. If the shaft is not aligned, the insert bearing can fail prematurely. If in doubt, send us the part number and we will tell you the compatible alternative.

DODGE SXR series mounted units can be interchanged with other brands that use the same insert system and standardized dimensions. Interchangeability depends on the shaft diameter, the distance between fastening centers and the housing height. It is not enough for the part number to be similar: the critical dimensions must be compared. If you cannot find the exact reference, at MR Accesorios Industriales we advise you on choosing the equivalent unit.

MR Accesorios Industriales sells the DODGE line. If you need a quote for an SXR series Y-bearing insert unit, write to us on WhatsApp with the part number or the shaft size. We will reply shortly with the alternative that best suits your equipment. We can also advise you on mounting, sealing and lubrication so that the unit works without problems.