Pillow block bearing DODGE TB-SXR-112

DODGE TB-SXR-112 is a pillow block bearing reference, within Bearing housings. Request a quote for TB-SXR-112 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SXR Y-bearing pillow block is a mounted unit that combines an insert bearing with a cast iron housing. It is used to support rotating shafts in equipment where simple alignment and fastening are required. MR Accesorios Industriales carries this line as an official brand, with sizes for different shaft diameters. If you need to replace an existing unit, send the part number via WhatsApp and we will quote it.

The SXR series designation is read from the complete part number: TB-SXR- followed by a number that identifies the size. For example, TB-SXR-012, TB-SXR-014 and TB-SXR-015 correspond to the smallest sizes, while TB-SXR-100, TB-SXR-101 and TB-SXR-102 cover the intermediate ones. The numeric suffix does not indicate the diameter directly, but rather the combination of housing and insert bearing. To choose the correct unit, compare the part number with the one on the equipment or ask us with the shaft size.

These pillow blocks are used in conveyors, belts, elevators, mixers, mills and process equipment in food, chemical and materials plants. In Argentina they are common in the oilseed, meatpacking and aggregate processing industries. The pillow block allows mounting the shaft on a flat base and absorbing moderate radial and axial loads. Being a sealed unit, it requires little maintenance and withstands dusty or humid environments if the appropriate seal is chosen.

To select the unit, take into account the shaft diameter, the type of load and the environmental conditions. Verify that the housing sits well on the base and that the fastening bolts are tightened without deforming the casting. Lubrication comes from the factory, but in demanding applications it is advisable to check the condition of the seal and the operating temperature. If the shaft is not aligned, the insert bearing may fail prematurely. If in doubt, send us the part number and we will indicate the compatible alternative.

DODGE SXR mounted units can be interchanged with other brands that use the same insert system and standardized dimensions. Interchangeability depends on the shaft diameter, the distance between fastening centers and the housing height. It is not enough for the part number to be similar: the critical dimensions must be compared. If you cannot find the exact reference, at MR Accesorios Industriales we advise you to choose the equivalent or closest unit according to your application.

MR Accesorios Industriales carries the DODGE line with more than 80 years of experience in the field. If you need a quote for an SXR series Y-bearing pillow block, write to us via WhatsApp with the part number or shaft size. We will reply shortly with the alternative that best suits your equipment. We can also advise you on mounting, sealing and lubrication so that the unit works without problems.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.