DODGE TB-SCFS-20M-SHFS flange bearing 2 holes

DODGE TB-SCFS-20M-SHFS is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for TB-SCFS-20M-SHFS via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The Y-bearing 2-bolt flange bracket with insert bearing is a mounted unit that combines an insert ball bearing with a flange housing ready to bolt to a flat surface. It is used to guide rotating shafts in equipment where the mounting must be compact and alignment is handled by the flange itself. The DODGE ER-Series covers general industrial applications in Buenos Aires, Argentina and the rest of Argentina.

The designation of these brackets is read in blocks: TB identifies the flange bracket line, SCFS indicates the two-bolt configuration, the number that follows —20, 25, 30, 35 or 40— corresponds to the shaft diameter in millimeters, and M indicates the insert locking type. The suffix SHFS defines the sealing and housing features. Thus, TB-SCFS-25M-SHFS is a 2-bolt flange bracket for a 25 mm shaft, with the ER-Series insert.

These brackets appear in belt conveyors, mixers, blowers, centrifugal pumps, packaging lines and water treatment equipment. In food, chemical and aggregate plants in Argentina they are chosen for the ease of mounting on sheet metal or structure and for the possibility of replacing the insert without completely disassembling the shaft. They are also used in agricultural machinery and in material handling equipment where mounting space is limited.

To select the bracket, start from the shaft diameter and the load type: radial, axial or combined. Check the insert sealing according to the environment: dust, moisture or frequent washdowns require tighter seals. During mounting, rest the flange on a clean, flat surface, tighten the bolts in a cross pattern and check the shaft alignment with the equipment. The insert is lubricated with compatible grease and without overfilling. If the shaft operates with misalignment, the ER-Series insert allows a small self-aligning clearance.

Flange brackets with insert bearings are interchangeable between manufacturers if the shaft diameter, the hole spacing and the locking type match. Equivalent lines from other brands may vary in sealing or locking system, so it is advisable to compare the complete designation and not just the diameter. At MR Accesorios Industriales we indicate the compatible alternative.

If you need a 2-bolt flange bracket with insert bearing, send the part number or model by WhatsApp to MR Accesorios Industriales. We will quote it promptly and, if you are looking for a variant you do not see, write to us with the part number you need.