Pillow block bearing DODGE TB-SC-104S

DODGE TB-SC-104S is a pillow block bearing reference, within Bearing housings. Request a quote for TB-SC-104S via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The TB-SC pillow block is a DODGE SC series mounted pillow block bearing: a unit that combines a cast iron housing with a ball insert bearing, already aligned and ready to bolt to the structure. It is used to support drive shafts in equipment where rigidity, good holding and simple mounting are required, without machining housings or assembling the unit piece by piece.

The TB-SC designation is read in blocks: TB identifies the pillow block type, SC the insert bearing series and the numeric suffix with the final letter S defines the size within that series. Thus, TB-SC-104S is a specific size in the family. When the number in the code changes, the shaft diameter it accommodates changes; the letters remain and always refer to the same housing geometry and the same insert type.

These pillow blocks appear in conveyors, belts, elevators, mixers, fans, pumps and process lines. In food, chemical, cement and aggregate plants in Argentina they are chosen for ease of replacement and because the pillow block allows mounting onto folded sheet metal, profiles or concrete beds with two bolts. They are also used in material handling equipment and in agricultural machinery.

To select correctly, start from the shaft diameter and the load type: the ball insert works well under moderate radial loads and medium speeds. Check the sealing according to the environment: dust, water or frequent washdown require tighter protection. During mounting, rest the housing on a flat, rigid surface, align the shafts before tightening and lubricate the insert according to the duty cycle. Slight misalignment is compensated by the insert itself, but it does not replace good leveling.

Regarding interchangeability, pillow blocks with insert are compared between brands by series, shaft diameter and housing dimensions: two units of different origin can share dimensions if they comply with the same mounting standard. The commercial code alone is not enough: the housing and insert geometry must be cross-referenced. If you need to replace an existing unit, send us the code stamped on the housing or the shaft dimensions.

If you have the code TB-SC-104S or any other size in the SC series, send it via WhatsApp to MR Accesorios Industriales along with a photo of the housing and the shaft dimensions. We will quote the reference and, if necessary, indicate the compatible alternative within the same family. With more than 80 years in the field, at MR Accesorios Industriales we resolve technical inquiries about pillow blocks and insert bearings every day.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.