Pillow block bearing DODGE TB-GT-45M

DODGE TB-GT-45M is a pillow block bearing reference, within Bearing housings. Request a quote for TB-GT-45M via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE GT series pillow block is a mounted pillow block bearing: a unit that combines a cast iron housing and an insert bearing, ready to be bolted to the structure with two bolts. It is used to support rotating shafts in conveyors, fans, belts and process equipment, where a robust and self-aligning unit is needed to absorb slight misalignments and simplify assembly. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina.

The GT series designation is read in blocks: the letters TB identify the pillow block, GT the insert bearing family and the final number the nominal shaft size. For example, TB-GT-04M corresponds to a pillow block with GT insert for a 4/8 inch shaft, while TB-GT-20M covers a 20/8 shaft, that is 2 1/2 inches. The suffix M indicates the metric or inch mounting variant according to the catalogue. To choose the correct part number, have the shaft diameter and the mounting type at hand.

These pillow blocks are seen in food and beverage plants, cement plants, paper mills, water treatment plants and packaging lines. In Argentina they are common in belt conveyors, bucket elevators, mixers, blowers and continuous process equipment. The cast iron housing resists dust, humidity and moderate radial loads, and the insert with labyrinth seal keeps lubrication in dirty environments. They are also used in agricultural machinery and material handling equipment.

To select, start from the shaft diameter and the radial and axial load that the unit must support. Check the sealing type: versions with contact seal are better for environments with fine dust or liquids, while labyrinth seals tolerate higher speed. Mounting requires a flat base, bolts tightened to torque and alignment of the pillow blocks on the same shaft. Lubrication is done with lithium or compatible grease, without mixing different bases. If the shaft works with misalignment, the self-aligning capacity of the insert helps, but it does not replace correct alignment.

Regarding equivalences, pillow blocks with insert bearing are interchanged between brands by shaft number and mounting configuration, not by the complete part number. A DODGE GT series pillow block can be replaced by units from other brands with the same shaft size and similar load capacity, but center height, bolt distance and sealing type must be compared. MR Accesorios Industriales tells you the compatible alternative if you need to change brands or if the original part number is not available.

If you have the pillow block part number or the shaft diameter, send it via WhatsApp to MR Accesorios Industriales and we will quote it shortly. We can also advise you on lubrication, mounting and compatible alternatives for your application. We work with the DODGE line and with equivalent options so you find the unit your equipment needs.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.