DODGE TB-GT-104S pillow block bearing

DODGE TB-GT-104S is a reference of pillow block bearing, within Bearing housings. Request a quote for TB-GT-104S via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE GT series Y-bearing insert unit is a pillow block that combines an insert ball bearing with a cast housing, designed to mount rotating shafts on fixed structures. It is used in power transmission equipment where radial support and self-alignment are required. MR Accesorios Industriales sells this line, with technical advice to select the right variant according to shaft diameter and mounting type.

The GT series designation is structured with the prefix TB-GT followed by a three-digit number and the suffix S. The middle number indicates the nominal shaft diameter in inches, coded according to Dodge's usual practice: for example, TB-GT-104S corresponds to a housing for a 1 1/4 inch shaft. The S suffix indicates the series' standard sealing configuration, designed to retain lubricant and exclude contaminants in environments with moderate dust or moisture. For other sizes, the middle number changes and MR quotes it with that data.

These housings are used in a wide variety of industries in Argentina: food and beverage plants, packaging lines, belt conveyors, milling equipment, agitators, centrifugal pumps and ventilation systems. Their pillow block format allows them to be fastened to structural profiles, folded sheet metal bases or concrete foundations, and their spherical outer insert accommodates initial shaft misalignment without generating parasitic loads. They are common in applications where the shaft rotates at moderate speeds and loads are predominantly radial, with little axial thrust.

To select the correct housing, take into account shaft diameter, load type and environmental conditions. The GT series allows base-bolt mounting; it is advisable to verify tightening torque and initial alignment to avoid stress. The series' sealing helps maintain lubrication and protect against dust and splashes. If the equipment operates at high temperatures or is exposed to chemicals, ask about variants with special seals. Lifetime lubrication is common in these inserts, although in severe environments periodic relubrication may be required.

As for equivalents, Y-bearing insert units from different brands share standardized dimensions, but they are not always interchangeable without verifying the center height, shaft diameter and mounting hole spacing. The Dodge GT series can replace other similar lines on the market, but comparing the dimensional data sheet is essential. MR Accesorios Industriales will point you to the compatible alternative if you have the original part number or the shaft and housing dimensions.

If you need a Y-bearing insert unit for your equipment, send the part number TB-GT-104S or the model you are looking for via WhatsApp. At MR Accesorios Industriales we will quote it promptly and advise you so the unit fits your application. We can also offer equivalent options if the mounting requires a different sealing or fastening configuration.