DODGE TB-DLM-208 take-up bearing

DODGE TB-DLM-208 is a reference of take-up bearing, within Bearing housings. Request a quote for TB-DLM-208 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE TB-DLM take-up frame is a mounted bearing with a steel housing used to maintain tension in belt or chain drives. Series 214 corresponds to a medium-section insert bearing, mounted on the shaft with set screws. It is used in conveyors, fans, screens and equipment where the take-up corrects deflection or elongation. MR Accesorios Industriales supplies this line and advises you on choosing the right variant for your application.

The designation TB-DLM identifies a take-up frame with an insert bearing from the DODGE line. The letters TB correspond to the take-up housing type; DLM indicates the housing design and the locking system. The final number, as in TB-DLM-208, indicates the shaft diameter according to the metric or inch series. In series 214, that number defines the shaft diameter and the load capacity of the insert. To request a quote, send us the complete part number shown on the nameplate or the drawing.

These take-ups are used in belt and chain conveyors, bucket elevators, vibrating screens, industrial fans and agricultural machinery. In food, cement, aggregate and oilseed plants, the TB-DLM take-up maintains belt tension and absorbs misalignment variations. Its housing allows mounting in different positions to adjust tension. In Argentina, MR Accesorios Industriales supplies it for replacement and new projects.

To select the take-up, take into account the shaft diameter, the type of load (radial or combined) and the environmental conditions. The insert seal defines the protection against dust and moisture: choose the appropriate labyrinth or lip seal for the environment. Lubrication is permanent in most inserts, but in severe applications a grease point should be provided. During mounting, align the housing with the drive and tighten the set screws to the recommended torque to prevent slipping.

DODGE mounted bearings are interchangeable with other brands that use the same series and shaft diameter nomenclature. If your equipment has a take-up from another brand, compare the shaft diameter, the hole spacing and the center height. In many cases, the DODGE TB-DLM directly replaces other brands with the same designation. If you need an alternative, at MR we tell you the compatibility with the original part number.

To move forward with the quote, send us the complete take-up frame part number by WhatsApp, for example TB-DLM-208, or the shaft and housing dimensions. At MR Accesorios Industriales we quote you promptly and indicate the compatible alternative if needed. We also manufacture split plummer block housings and custom parts to adapt the take-up to your equipment.