Hanger bearing DODGE SCHB-SCM-307

DODGE SCHB-SCM-307 is a hanger bearing reference, within Bearing housings. Request a quote for SCHB-SCM-307 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SC hanger bearing unit with insert bearing is a mounted unit ready to be fixed to structure and support drive shafts in motion. It is used when the shaft needs an intermediate support point: conveyors, process lines, washing equipment or any assembly where the span between supports is long. The SC series combines an insert bearing with a housing that allows hanger mounting, alignment and controlled lubrication. MR Accesorios Industriales carries this DODGE line in Buenos Aires, Argentina.

The SC series designation is read in blocks: the letters identify the unit type and the housing, and the final number indicates the shaft size for which it is built. In the examples SCHB-SCM-307 and SCHB-SCM-308, the numeric suffix indicates different shaft diameters within the same family. That logic allows you to order the unit by full part number and ensure that the insert bearing, the housing and the locking system correspond to the same shaft size.

These units are seen in belt and chain conveyors, elevators, packaging lines and processes where the shaft receives radial load and some thrust. They also appear in water treatment equipment, feed mills and industrial ventilation assemblies. In Argentina, the SC series is common in plants that need to replace a hanger support without disassembling the entire line: the complete unit is replaced and the shaft is put back into service.

To choose well, look at the shaft diameter, the type of shaft locking and the mounting position. The insert seal defines how much contamination it tolerates: in dusty or wet environments, reinforced protection is advisable. Lubrication must be the one specified for the insert and renewed according to the duty cycle. During mounting, align the housing with the shaft before tightening the bolts and verify that the bearing rotates without hard spots.

Mounted units of this type are available in several brands and lines, and interchangeability depends on matching the shaft diameter, the housing mounting pitch and the insert type. It is not enough for the part number to look similar: the housing geometry and the locking system must be compared. If the original part number is not available, the compatible alternative with those same dimensions is sought.

If you have the part number of the unit you are replacing, send it by WhatsApp to MR Accesorios Industriales along with a photo of the assembly. With that we will quote the corresponding SC unit or indicate the compatible alternative. We can also check shaft and mounting dimensions to confirm that the new unit fits in the same place.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.