V-belt DODGE R5VX1120

DODGE R5VX1120 is a v-belt reference, within Power transmission. Request a quote for R5VX1120 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE 5VX series V-belt is a power transmission element for grooved V pulleys, designed to transmit torque between shafts efficiently and with low maintenance. It is used in equipment where a stable transmission ratio and vibration absorption are required, such as fans, pumps, compressors and conveyors. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, and advises you on choosing the correct size for your application.

The 5VX series designation is read in parts: the number 5 indicates the belt section within the V-profile system, the letter V confirms it is a classic V-belt and the X indicates a high-performance construction, with greater transmission capacity than a standard belt of the same section. Then come the figures that define the outside or effective length, depending on the manufacturer. In the examples R5VX500, R5VX560, R5VX600, R5VX630, R5VX670, R5VX710, R5VX750 and R5VX800, that final segment marks increasing lengths within the same family. To request a quote, send us the complete code shown on the belt you are replacing.

These belts are seen in industrial plants, workshops and agricultural establishments throughout the country. They appear in centrifugal fans, water pumps, screw compressors, mixers, screens and belt conveyors. They are also used in machine tools and process equipment where belt transmission allows some elasticity and protects the motor against overloads. In the Argentine market they circulate as replacements for imported and domestic equipment, and the replacement is often defined by the size stamped on the old belt.

To properly select a 5VX belt, take into account the section and length required by the pulley, the number of grooves, the center distance and the power to be transmitted. Check the condition of the pulleys: worn or burred grooves shorten belt life. Alignment between pulleys must be careful, because misalignment causes irregular wear and noise. Tension is adjusted according to the equipment manual: loose slips and heats up, excessive punishes the shaft bearings. If the equipment remains stopped for a long time, it is advisable to loosen the tension so as not to deform the belt.

Regarding equivalences, V-belts are identified by section and length, and different brands may offer a compatible size even if the commercial code changes. It is not advisable to rely only on the name: you must compare section, effective length and type of construction. If the original code is not available, it can be replaced by a belt of the same section and equivalent length. At MR Accesorios Industriales we indicate the compatible alternative and, if necessary, we manufacture it to measure for your application.

If you already have the code of the belt you need, send it via WhatsApp along with a photo of the pulley or the old belt. With that data we quote the exact size and indicate whether an alternative of the same section is advisable. We handle inquiries from all over the country and respond promptly. MR Accesorios Industriales, more than 80 years supporting Argentine industry.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.