V-belt DODGE R5V2120

DODGE R5V2120 is a v-belt reference, within Power transmission. Request a quote for R5V2120 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 5V series V-belt DODGE is a power transmission element that seats in the grooves of a grooved pulley and transmits motion between shafts through friction. It is used in industrial drives where continuous operation and vibration absorption are required. MR Accesorios Industriales supplies it in Buenos Aires, Argentina, and quotes it on WhatsApp with the part number of the size you need.

The designation of these belts is read in sections. The initial letters and number identify the section: the 5V series corresponds to the narrow section of 5/8 inch, designed to transmit more power in less space than a classic belt. The second number, as in R5V2120 or R5V3000, indicates the outside length of the belt. Therefore, when ordering a 5V, it is best to provide the complete part number: the section and the length already define the size.

In Argentine plants they appear in fans, centrifugal pumps, screw compressors, mills, screens, conveyor belts and refrigeration equipment. Also in machine tool drives and in multiple transmissions where several belts run in parallel on the same pulley. In those cases, the complete set is replaced together so that the load is distributed evenly between grooves and a single belt is not overloaded.

To select correctly, start with the power to be transmitted, the rpm of the driving shaft and the diameter of the pulleys. Verify that the pulley section matches that of the belt and that the chosen length allows the tensioner to be adjusted within its travel. During installation, align the pulleys with a straightedge or laser, tension according to the manufacturer's method and avoid forcing the belt onto the groove with tools. Low tension causes slippage and excessive tension stresses bearings and shafts.

V-belts are interchangeable between brands by section and length: a 5V from one manufacturer can replace another 5V of the same size, as long as the section and length match and the profile is compatible with the pulley. Do not mix different sections in the same drive or belts with very uneven wear in a multiple set. If the part number does not appear, the equivalent is found by size.

If you have the belt part number at hand, send it by WhatsApp to MR Accesorios Industriales and we will quote it shortly. If you need a variant you cannot find, write to us with the model or size and we will indicate the compatible alternative. We can also advise you on the appropriate section and length for your drive.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.