DODGE P2BSO-SCFS-35M-SHFS pillow block bearing

DODGE P2BSO-SCFS-35M-SHFS is a reference of pillow block bearing, within Bearing housings. Request a quote for P2BSO-SCFS-35M-SHFS via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE SCFS series Y-bearing pillow block is a foot-mounted bearing: a compact unit that combines a cast housing with a self-aligning ball insert. It is used to support rotating shafts in equipment where perfect alignment is not guaranteed, because the insert adjusts inside the housing. MR Accesorios Industriales sells this DODGE line in Buenos Aires, Argentina, and advises you on choosing the correct configuration for your application.

The SCFS series designation is read in blocks. In the examples P2BSO-SCFS-20M-SHFS, P2BSO-SCFS-25M-SHFS and P2BSO-SCFS-30M-SHFS, the prefix P2BSO identifies the bracket type and its mounting; SCFS is the insert series with its sealing features; the central number (20, 25, 30, 35, 40) indicates the shaft diameter in millimeters; and the suffix M-SHFS indicates locking and sealing variants. With that data you can locate the unit that corresponds to your shaft.

These brackets are seen in belt conveyors, bucket elevators, mixers, mills, centrifugal pumps and process equipment in food, chemical, cement and aggregate treatment plants. In Argentina they are common in the oilseed, meatpacking and mining industries, where dust, moisture or washdown require reliable sealing. The SCFS series, due to its ball insert and foot housing, is a practical option for transmission shafts and machine rollers that work with moderate load.

To select the bracket, check the shaft diameter, the type of mounting to the frame and the environmental conditions. The insert sealing defines resistance to water, dust and chemical agents; if there are frequent washdowns, additional protection is advisable. Lubrication must be the one indicated for the insert and renewed according to the duty cycle. During mounting, rest the bracket on a flat, rigid surface, align the shaft and tighten the mounting bolts evenly so as not to deform the housing.

Mounted bearings of this type are available from different brands with their own nomenclatures. Equivalences are established by shaft dimensions, bracket configuration and sealing type, not by the commercial part number. If your equipment has a bracket from another brand, send us the shaft measurements and the mounting hole spacing, and we will indicate the compatible alternative from DODGE or from another line we sell. MR Accesorios Industriales manufactures split plummer block housings, ANSI chains and pulleys.

If you already have the part number of the bracket you need, send it by WhatsApp to MR Accesorios Industriales and we will quote it promptly. If you cannot find it, write to us with the shaft diameter and working conditions, and we will help you define the right unit. We can also advise you on mounting, lubrication and sealing so that the bearing performs as it should in your equipment.