DODGE P2BSO-SCFS-014-SHFS pillow block bearing

DODGE P2BSO-SCFS-014-SHFS is a reference of pillow block bearing, within Bearing housings. Request a quote for P2BSO-SCFS-014-SHFS via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE SCFS series Y-bearing pillow block is a foot-mounted unit that combines a cast iron housing with a self-aligning insert ball bearing. It is used to support rotating shafts in equipment where the load is moderate and alignment between supports is not perfect. MR Accesorios Industriales sells this line in Buenos Aires, Argentina.

The series designation is read in blocks: the P2BSO prefix identifies the housing type and its mounting configuration, SCFS corresponds to the pillow block series, and the middle number defines the shaft diameter in inches or millimeters depending on the system. The examples P2BSO-SCFS-012-SHFS and P2BSO-SCFS-100-SHFS show that size variation: three-digit codes with a leading zero correspond to inch shafts, while those in the 100 series point to metric sizes. The SHFS suffix indicates the sealing type and the insert mounted.

These pillow blocks are found in belt conveyors, bucket elevators, mixers, screens and process lines in food, chemical and aggregate plants. In Argentina they are common in milling equipment, irrigation water wheels and machines for the meatpacking industry, where a humid or dusty environment demands a robust housing and an insert that tolerates some misalignment. The foot base allows it to be fastened to sheet metal beds or structural profiles with two bolts, which simplifies mounting and replacement in the field.

To select the correct pillow block, take into account the shaft diameter, the type of load and the environmental conditions. The SHFS sealing protects against dust and moisture, but if there are frequent washdowns, additional protection should be evaluated. When mounting, rest the base on a flat, clean surface, tighten the bolts without forcing the housing and verify that the insert can self-align. Lubrication of the insert bearing is done through the housing channel; follow the equipment maintenance plan and check radial clearance if there is noise or vibration.

Mounted units of this type are interchangeable between manufacturers when the shaft diameter, the center height and the distance between base holes match. Series with a pillow block housing and insert bearing from different brands usually share those dimensions, although the sealing and the shaft locking system may vary. If you need to replace an existing unit, send us the complete part number or the shaft and base dimensions: at MR Accesorios Industriales we will indicate the compatible alternative.

To request a quote for your DODGE SCFS series Y-bearing pillow block, send the part number via WhatsApp to MR Accesorios Industriales. If you cannot find the exact variant, write to us with the model or the shaft and base dimensions: we will reply shortly with the option you need.