Pillow block bearing DODGE P2B-VSCU-010

DODGE P2B-VSCU-010 is a pillow block bearing reference, within Bearing housings. Request a quote for P2B-VSCU-010 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE VSCU pillow block is a mounted unit that combines an insert ball bearing with a pillow block housing, ready to bolt to a flat base. It is used to support rotating shafts in equipment where alignment and sealing are critical, such as conveyor belts, mills and pumps. MR Accesorios Industriales supplies this DODGE line in Buenos Aires, Argentina, and advises you on choosing the right variant for your application.

The VSCU series designation is read in blocks: the prefix P2B indicates a two-bolt pillow block; VSCU identifies the insert bearing family with sealing and locking features; and the final numeric suffix, as in P2B-VSCU-008 or P2B-VSCU-103, indicates the shaft size for which the unit is built. The examples P2B-VSCU-008, P2B-VSCU-010, P2B-VSCU-102 and P2B-VSCU-103 show different sizes within the same series. To select, you must cross-reference that code with the shaft diameter and the working conditions.

These pillow blocks are used in industries in Argentina such as food, cement, mining and logistics. They are found in belt conveyors, bucket elevators, mixers, fans and centrifugal pumps. The pillow block housing allows the bearing to be mounted on steel or concrete structures, and the insert absorbs radial loads and some axial thrust. In plants with dust, moisture or frequent washdowns, the VSCU series provides an additional barrier that extends the service life of the assembly.

To choose correctly, take into account the type of sealing required for the environment: a clean area is not the same as one with abundant water or particles. Also check the internal clearance and the shaft locking system, which may be by set screws or taper bushing. During mounting, make sure the base is perfectly aligned and flat; angular or parallel misalignment accelerates wear. Lubrication must be the one specified by the manufacturer and renewed according to service hours. If the equipment operates with vibration, check the tightening of the locking screws.

DODGE mounted units are interchangeable with other brands that use equivalent designations, such as SKF, FAG or NTN, as long as the main dimensions match: shaft diameter, distance between mounting holes and height to center. It is not enough for the code to be similar; you must compare the dimension drawing. At MR Accesorios Industriales we help you find the right equivalent for your equipment, without compromising performance. If your application requires a special variant, ask us and we will look at the best solution.

To request a quote for the DODGE VSCU pillow block you need, send us the complete code on WhatsApp, for example P2B-VSCU-008 or P2B-VSCU-103. You can also tell us the shaft dimensions and send a photo of the current mounting. At MR Accesorios Industriales we reply promptly with the alternative that best suits your equipment. More than 80 years supporting Argentine industry back us.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.