DODGE P2B-SXVB-104S pillow block bearing

DODGE P2B-SXVB-104S is a reference of pillow block bearing, within Bearing housings. Request a quote for P2B-SXVB-104S via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The Y-bearing pillow block with insert bearing of the SXVB series is a foot-mounted assembly: the cast iron housing and the ball bearing come assembled as a single unit, with the insert already secured to the shaft by its locking system. It is used to support transmission shafts in equipment where a compact, self-aligning unit with simple mounting is required, without machining housings or assembling the bearing separately on the shaft.

The designation of these pillow blocks is read in blocks. The initial letters identify the housing type and its mounting configuration; the SXVB group corresponds to the insert series and defines the shaft locking system and the sealing. The final numeric section indicates the bore size of the insert, which in practice translates to the shaft diameter the assembly accepts. An example from the series is P2B-SXVB-104S: there you can see the pillow block type, the insert series and the size. To request a quote, send us the complete part number as it appears on the nameplate or on the equipment drawing.

In Argentine industry these pillow blocks appear in belt and chain conveyors, elevators, mixers, blowers, industrial washers, packaging lines and water treatment equipment. They are also found in agricultural machinery and food plants, where the cast iron housing withstands the humid environment and the sealed insert works with dust and splashes. Being a foot-mounted unit, it is mounted on a flat base with two bolts and tolerates small misalignments typical of structure assembly.

To choose correctly, take into account the shaft diameter, the type of load (radial, or combined radial and axial) and the working environment. The insert sealing defines how much contamination it tolerates: in areas with water or fine dust, a tighter protection is advisable. The shaft locking system conditions mounting and dismounting: verify that it is suitable for the direction of rotation and for the equipment vibrations. Lubrication is defined at the factory and is replenished according to the duty cycle. When mounting, rest the housing on a clean, flat surface, tighten the bolts in a cross pattern and check shaft alignment before start-up.

Insert bearing pillow blocks are interchangeable between manufacturers by part number and by dimensions: shaft diameter, hole spacing, height to center and locking type. It is not enough for the shaft diameter to match; the housing geometry and the locking system must also be compared. The equivalent unit from another line is sought or the mounting is adapted. At MR Accesorios Industriales we indicate the compatible alternative and, if necessary, we quote it to measure.

If you have the pillow block part number, the shaft size or a photo of the nameplate, send it by WhatsApp to MR Accesorios Industriales. With that data we will quote the unit of the SXVB series or its equivalent, and advise you on mounting and lubrication. We have been working in the industrial sector since 1945, and we respond shortly.