Pillow block bearing DODGE P2B-SXRU-17M-NL

DODGE P2B-SXRU-17M-NL is a pillow block bearing reference, within Bearing housings. Request a quote for P2B-SXRU-17M-NL via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SXRU series Y-bearing housing with insert bearing is a foot-mounted assembly: the cast housing and the ball bearing come assembled as a single unit, ready to bolt to the structure. It is used to guide shafts in equipment where alignment and sealing are already resolved at the factory, and it simplifies mounting compared with a split housing with a loose bearing. MR Accesorios Industriales sells this line in Buenos Aires, Argentina.

The SXRU series designation is read in blocks. In P2B-SXRU-17M-NL, for example, the first letters and the number indicate the housing type and its mounting configuration; SXRU identifies the insert bearing family; the middle number refers to the shaft diameter; and the suffixes M and NL describe sealing and insert locking variants. The examples P2B-SXRU-30M-NL and P2B-SXRU-75M-NL follow the same logic with different shaft sizes. To choose, send us the full part number.

These housings appear in belt conveyors, bucket elevators, mixers, screens, fans and process lines in food, chemical and aggregate plants. In the Argentine market they are found in milling equipment, waste treatment plants and material handling systems, where dusty or humid environments demand a unit with good sealing and accessible greasing. The foot housing absorbs radial loads and allows the shaft to be mounted on sheet metal structures or profiles without machining seats.

To select correctly, take into account the shaft diameter, the radial and axial load it will support, and the type of sealing required by the environment. The insert is fixed to the shaft with set screws or with an adapter sleeve depending on the variant, and it is advisable to check the alignment of both housings before tightening. Lubrication is done through the housing grease channel; use the grease indicated for the working temperature and do not mix different bases. In applications with vibration, check the tightness of the set screws.

Interchange between Y-bearing housing brands is handled by shaft dimensions, hole spacing and center height, rather than by the commercial part number. A housing from another brand with the same shaft size may not share the mounting height or hole position, so interchangeability is confirmed by comparing drawings. If you need to replace an existing assembly, send us the part number stamped on the housing or the main dimensions and we will indicate the compatible alternative.

If the equipment is down or you need to replace a housing, write to us on WhatsApp with the part number P2B-SXRU-17M-NL, P2B-SXRU-30M-NL or P2B-SXRU-75M-NL, or with the shaft size and mounting type. At MR Accesorios Industriales we will quote the assembly and, if another variant of the series is needed, we will source it for you. With more than 80 years in the field, we support technical selection and mounting.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.