Pillow block bearing DODGE P2B-SXRB-20M-FF

DODGE P2B-SXRB-20M-FF is a pillow block bearing reference, within Bearing housings. Request a quote for P2B-SXRB-20M-FF via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SXRB series Y-bearing pillow block unit is a pillow block mounted bearing: a compact unit that combines an insert ball bearing with a cast housing, ready to mount on a bedplate or structure. It is used to guide and support rotating shafts in equipment where a robust solution with easy alignment is needed. MR Accesorios Industriales carries this line in Buenos Aires, Argentina, and advises you on choosing the correct variant for your application.

The SXRB series designation is read in blocks: the P2B prefix indicates the pillow block type, split or two-bolt, with two mounting holes; SXRB identifies the insert bearing series, with reinforced sealing; the number that follows (20M, 25M, 30M, etc.) corresponds to the shaft diameter in millimeters; and the FF suffix denotes the seal type, with contact seals. Thus, a P2B-SXRB-30M-FF is a pillow block for a 30 mm shaft with a sealed insert. The SXR series shares the same construction logic.

These pillow blocks are used in a wide variety of industries in Argentina: food plants, material handling, agricultural machinery, bottling equipment, conveyor belts, mixers and industrial fans. Their pillow block design allows them to be mounted on flat surfaces and to absorb slight misalignments, which simplifies assembly and reduces commissioning time. They are a common choice when an insert bearing with good protection against dust and moisture is required.

To select the correct pillow block, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The FF seal with contact seals offers greater protection than simple seals, so it is recommended in environments with dust, chips or liquids. Installation must be carried out on a clean, flat surface, with the mounting bolts tightened to the recommended torque. Factory lubrication is usually sufficient for the bearing's service life, but in severe applications it may require periodic relubrication.

As for equivalents and interchangeability, Y-bearing pillow block units from different brands may differ in mounting dimensions, seal type and load capacity. Therefore, when replacing equipment, it is important to verify the main dimensions (shaft diameter, hole spacing, height to center) and the mounting type. MR Accesorios Industriales can indicate the compatible alternative from DODGE or another brand it carries, always respecting the original dimensions.

If you need a quote for a DODGE SXRB series Y-bearing pillow block unit, write to us on WhatsApp with the full part number (for example, P2B-SXRB-40M-FF) or with your shaft dimensions and the hole spacing. At MR Accesorios Industriales we will quote you promptly and help you find the variant that best suits your equipment. More than 80 years of experience in industrial distribution back us up.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.