Pillow block bearing DODGE P2B-SXRB-014-FF

DODGE P2B-SXRB-014-FF is a pillow block bearing reference, within Bearing housings. Request a quote for P2B-SXRB-014-FF via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SXRB series pillow block with insert bearing is a mounted assembly that combines an insert ball bearing unit with a split or solid pillow block housing, depending on the model. It is used to support rotating shafts in equipment where alignment and permanent lubrication are required. MR Accesorios Industriales supplies this line for plants and workshops in Buenos Aires and throughout the country.

The SXRB series designation is read in blocks: the prefix P indicates pillow block; the number that follows —2, 3 or 4— defines the housing size; B indicates the split mounting type; SXRB identifies the insert bearing series; the final number —012, 014, 100, 101, etc.— corresponds to the shaft diameter. The suffix FF indicates the unit seal. Thus, a P2B-SXRB-012-FF is a size 2 pillow block, with SXRB insert for a 12/16 inch shaft and FF seal.

These pillow blocks are used in belt conveyors, bucket elevators, mixers, mills, centrifugal pumps and industrial fans. In Argentina they are common in food, cement, mining and aggregate processing plants, where dusty or humid environments require effective sealing. The pillow block housing allows mounting the shaft on a flat base and absorbing moderate radial and axial loads, with the possibility of self-alignment of the insert.

To select the pillow block, verify the shaft diameter, the type of load and the environmental conditions. The FF seal protects against dust and splashes; if there are frequent washdowns, additional seals should be evaluated. The insert allows slight angular misalignment, but the base must be well supported and shimmed. Factory lubrication is permanent in many models; in others it can be relubricated. Follow the mounting instructions to avoid damaging the insert when securing the shaft.

DODGE manufactures this series under dimensional standards that facilitate interchangeability with other brands of pillow blocks with insert bearings. When replacing, compare the overall height, the distance between mounting holes and the shaft diameter; it is not enough for the part number to match. If the original pillow block is not available, MR Accesorios Industriales will indicate the compatible alternative or manufacture it to measure in its workshops.

To request a quote, send by WhatsApp the complete part number that appears on the plate or on the housing —for example, P2B-SXRB-014-FF— or the shaft and base dimensions. With that data, we will send you the quote promptly. If you cannot find the exact variant, write to us anyway: we will guide you to get the right unit.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.