Pillow block bearing DODGE P2B-SCUEZ-104S-SHSS

DODGE P2B-SCUEZ-104S-SHSS is a pillow block bearing reference, within Bearing housings. Request a quote for P2B-SCUEZ-104S-SHSS via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SCUEZ SHSS Y-bearing pillow block is a foot-mounted unit: it combines an insert bearing with a housing that is fixed to the structure. It is used to support rotating shafts in equipment where alignment and sealing are critical. MR Accesorios Industriales supplies this Dodge line in Buenos Aires, Argentina, and advises you on choosing the correct configuration for your application.

The SCUEZ SHSS series designation is read in blocks. The prefix P indicates the pillow block type; the B corresponds to the split pillow block series. The code SCUEZ identifies the insert bearing with its sealing and locking features, and SHSS defines the sealing system and the tolerances of the assembly. The example P2B-SCUEZ-104S-SHSS shows how the housing size, shaft diameter and seal variants are combined. To request a quote, send us the full part number shown on the nameplate or drawing.

These pillow blocks are used in belt conveyors, bucket elevators, mixers, mills, centrifugal pumps and process equipment in food, chemical and aggregate processing plants. In Argentina, they are common in the oilseed, meatpacking and cement industries, where the environment has dust, moisture or frequent washdowns. The foot-mounted unit allows the shaft to be mounted on a flat base and absorbs moderate radial and axial loads, with the possibility of replacing the insert without disassembling the entire housing.

To select correctly, take into account the shaft diameter, the type of load, the rotation speed and the environmental conditions. The SHSS seal protects against contaminants and retains lubricant; if there are pressure washdowns, it is advisable to verify the seal type. Internal clearance and lubrication must follow the manufacturer's instructions for each size. During mounting, make sure the base is flat and aligned, and that the fixing bolts are tightened evenly to avoid deformation of the housing.

Dodge mounted units are interchangeable with other brands of Y-bearing pillow blocks, as long as the fixing dimensions, shaft diameter and seal type match. It is not enough for the part number to be similar: the drawings must be compared. If you need to replace an existing unit, send us a photo of the nameplate or the hole measurements and we will indicate the compatible alternative. MR Accesorios Industriales supplies Dodge as an official brand and can guide you on the equivalent.

If you already have the part number P2B-SCUEZ-104S-SHSS or any other variant of the SCUEZ SHSS series, write to us on WhatsApp and we will quote you promptly. We can also advise you if you need a special configuration or an alternative for your equipment. At MR Accesorios Industriales we have worked with bearing housings for more than 80 years and we know the industrial applications of the region.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.