Pillow block bearing DODGE P2B-SCMU-100-NL

DODGE P2B-SCMU-100-NL is a pillow block bearing reference, within Bearing housings. Request a quote for P2B-SCMU-100-NL via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SCMU series pillow block is a mounted unit from the DODGE insert bearing line: a cast housing with a flat base that houses an insert ball bearing, already lubricated and sealed, ready to be fixed to the structure. It is used to support transmission shafts in equipment where rigid fastening and simple alignment are required, and it is one of the most widespread solutions in conveying, milling and industrial processes.

The designation of these units is read in blocks: the letter P indicates pillow block, the number that follows defines the housing size, and the letters SCMU identify the insert series and its sealing configuration. The suffix NL corresponds to the mounting variant with eccentric collar. An example from the series is P2B-SCMU-100-NL, where the central block sets out the combination of housing, insert and shaft diameter.

In Argentine industry they appear in belt conveyors, bucket elevators, mixers, screens, centrifugal pumps and packaging lines. They are also chosen in food and beverage plants, where the insert seal helps contain dust and moisture, and in mining and cement applications with moderate loads and continuously rotating shafts. The flat base allows them to be mounted on profiles, sheet metal beds or concrete structures with a leveling shim.

To select the correct unit, take into account the shaft diameter, the expected radial and axial load, and the type of sealing required by the environment: dust, water or frequent washing. During mounting, rest the base on a clean, flat surface, tighten the bolts without forcing the housing and check shaft alignment before putting it into service. Lubrication comes from the factory; for replenishment use grease compatible with the insert and check the eccentric collar so that the shaft is properly gripped.

Mounted units are interchangeable between manufacturers by shaft diameter and housing type, but the center height, the fixing hole spacing and the locking system do not always match. Before replacing one unit with another brand, compare those three dimensions and the load rating. At MR Accesorios Industriales we tell you the alternative compatible with your equipment and, if necessary, we manufacture it to measure.

If you already have the unit code, send it via WhatsApp together with the shaft diameter and a photo of the mounting: we will send you a quote shortly. If you are looking for a variant of the SCMU series that you do not see published, write to us with the model or the dimensions and we will send you the corresponding option.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.