DODGE P2B-SCMED-85M pillow block bearing

DODGE P2B-SCMED-85M is a reference of pillow block bearing, within Bearing housings. Request a quote for P2B-SCMED-85M via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE SCMED series pillow block is a mounted pillow block unit with a ball insert bearing, ready to bolt to a flat base. It is used to guide shafts in equipment where alignment and sealing are critical, such as conveyors, mills and pumps. MR Accesorios Industriales sells this DODGE line in Buenos Aires, Argentina, and advises you on choosing the right size for your shaft.

The SCMED series designation is read in blocks. The P2B prefix indicates a two-bolt pillow block; SCMED identifies the series with ball insert and reinforced sealing; the final number corresponds to the shaft diameter in millimeters. The final M indicates the metric variant. So, with the full part number you immediately know the housing type, the series and the shaft size you need.

In Argentine industry, these pillow blocks appear in belt conveyors, bucket elevators, mixers, mills and centrifugal pumps. They are also found in food processing equipment and in aggregate treatment plants. Their pillow block mounting simplifies installation on steel structures or concrete bases, and the ball insert absorbs radial loads and some axial thrust typical of shafts with slight misalignment.

To select the pillow block, take into account the shaft diameter, the type of load and the environmental conditions. The insert seal protects against dust and moisture; if the equipment operates with frequent washdowns, it is advisable to verify the degree of protection. Mounting requires a rigid base and alignment between pillow blocks to avoid stress. Insert lubrication is defined according to the duty cycle, and internal clearance should be standard unless otherwise indicated.

DODGE SCMED series pillow blocks are interchangeable with other brands of mounted pillow blocks that share the same shaft size and mounting configuration. When requesting a quote, provide the full part number or the shaft dimensions and the distance between holes. MR Accesorios Industriales tells you the compatible alternative if you need to replace an existing unit, maintaining the equipment's performance.

If you already have the pillow block part number, send it by WhatsApp to MR Accesorios Industriales and we will send you a quote shortly. If you are looking for a variant that does not appear, write to us with the model or shaft dimensions and we will tell you the option that best suits your application.