Product page
Pillow block bearing DODGE P2B-SCMAH-208
- Manufacturer Part Number
- P2B-SCMAH-208
- Brand
- DODGEOfficial brand
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SCMAH
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DODGE P2B-SCMAH-208 is a pillow block bearing reference, within Bearing housings. Request a quote for P2B-SCMAH-208 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The DODGE SCMAH Y-bearing pillow block is a foot-mounted assembly that combines a ball bearing unit with a machined housing. It is used to support rotating shafts in equipment where simple alignment and fastening are required. MR Accesorios Industriales supplies this line as an official brand, with alternatives for different shaft sizes.
The SCMAH series designation is read in blocks: the P2B prefix indicates the type of split or solid pillow block, and the final number identifies the shaft size. For example, P2B-SCMAH-103, P2B-SCMAH-107 and P2B-SCMAH-108 correspond to increasing diameters; the codes P2B-SCMAH-200, P2B-SCMAH-203 and P2B-SCMAH-211 cover the metric or inch series according to standard. The SCMAH suffix defines the insert design and its fastening system.
These units are used in belt conveyors, bucket elevators, mixers, mills and process equipment in food, chemical and aggregate plants. In Argentina they are common in the oilseed, meat processing and waste treatment industries. Their foot mounting facilitates installation on metal structures or concrete bases, with two anchor holes that allow leveling and aligning the shaft.
To select the correct unit, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The insert seal protects against dust and moisture; in environments with frequent washdowns, the protection should be verified. Factory lubrication is for life in many versions, but at high temperatures or speeds it may require relubrication. Alignment between units is critical to avoid stress on the bearing.
Equivalences between brands are established by standardized dimensions: a pillow block with an insert bearing of similar diameter and hole configuration can be interchanged between manufacturers. However, always verify the height dimensions, hole spacing and shaft diameter before replacing. MR Accesorios Industriales can indicate the alternative compatible with the code you are using.
If you need a DODGE SCMAH Y-bearing pillow block, send us the full code via WhatsApp. We will quote you promptly and advise you on the option that best suits your equipment. We can also offer in-house manufactured units if the requirement is special.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
- Eje o agujero
- 2-1/2 in
Frequently Asked Questions
- What does the designation P2B-SCMAH-103 mean?
- The P2B prefix indicates a pillow block; SCMAH defines the insert series and its fastening; the final number identifies the shaft size. In P2B-SCMAH-103, the code 103 corresponds to a specific shaft size in inches. Ask us for the exact code you need.
- Does this unit support axial loads?
- The insert bearings in this series are designed primarily for radial loads. For combined axial loads, it is recommended to evaluate a bearing with greater axial capacity or a unit with a different configuration. Our technical team can guide you according to your application.
- How do I request a quote for a DODGE SCMAH unit?
- Write to us on WhatsApp with the full code of the unit (for example, P2B-SCMAH-107) and the quantity you need. We will reply promptly with the quote and available alternatives. If you cannot find the code, send us the shaft dimensions and the hole spacing.