DODGE P2B-SCM-35M-NL pillow block bearing

DODGE P2B-SCM-35M-NL is a reference of pillow block bearing, within Bearing housings. Request a quote for P2B-SCM-35M-NL via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The SCM series Y-bearing housing with insert is a pillow block mounted bearing: the cast iron housing and the insert come assembled as a single unit, ready to be fixed to the structure with two bolts. It is used to guide shafts in equipment where alignment is not perfect, because the insert allows angular misalignment. MR Accesorios Industriales sells this DODGE line in Buenos Aires, Argentina.

The designation is read in blocks. The initial P indicates the pillow block housing type; the number that follows, the number of mounting holes. B indicates the housing variant, SCM identifies the series, and the number before the M is the insert bore size in millimeters. The suffix NL corresponds to the non-relubricable version, with sealing designed for life-long service.

In Argentine industry these housings appear in belt conveyors, bucket elevators, screens, mixers, exhausters and packaging lines. They are also seen in food plants, aggregate processing, pulp and paper, and in cold equipment where humidity punishes conventional bearings. The cast iron housing absorbs radial loads and some axial thrust, and the self-aligning insert simplifies mounting on welded or folded sheet metal chassis.

To choose well, start from the shaft diameter and the radial load the equipment supports, and add the axial thrust if there is any. Check the sealing type according to the environment: dust, water or frequent washdowns require more closed labyrinths or seals. During mounting, rest the housing on a flat surface, tighten the bolts without deforming the housing and check that the shaft turns freely. If the housing is relubricable, use the indicated grease and do not mix different bases.

The dimensions of the SCM series correspond to those of other Y-bearing housing lines on the market, so many times one housing is replaced by another keeping the shaft diameter and the distance between holes. Interchangeability depends on the mounting pitch, the center height and the insert type, not only on the code. If you need to replace an existing housing, send us the old code or the dimensions and we will indicate the compatible alternative.

MR Accesorios Industriales sells the DODGE line in Buenos Aires, Argentina. If you are looking for a size you do not see or want to confirm the equivalence with the housing you have mounted, write to us on WhatsApp with the code or model: we will quote it promptly.