Pillow block bearing DODGE P2B-SCM-208

DODGE P2B-SCM-208 is a pillow block bearing reference, within Bearing housings. Request a quote for P2B-SCM-208 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE Y-bearing pillow block is a foot-mounted unit that combines a cast iron housing with an insert ball bearing, already lubricated and sealed. It is used to support rotating shafts in equipment where alignment and sealing are critical. Its design allows mounting on flat bases and securing the shaft with set screws or adapter sleeves, depending on the model. MR Accesorios Industriales supplies this line to plants and workshops throughout Argentina.

The series designation is read in blocks: the initial letter indicates the housing type, the number that follows defines the number of mounting holes, and the SCM suffix identifies the sealing and locking variant. For example, P2B-SCM-100 corresponds to a two-bolt pillow block, while P2B-SCM-200 follows the same logic with a different combination of dimensions. The SCH-E and SCM series codes share the mounted unit concept, but differ in the insert locking system and in the type of peripheral sealing.

These pillow blocks are used in belt conveyors, bucket elevators, mixers, industrial fans, centrifugal pumps and process lines in food, chemical and aggregate processing plants. In Argentina they are common in sugar mills, oilseed plants, balanced feed plants and mining facilities, where dusty or humid environments demand effective sealing. They are also used in material handling equipment and in agricultural machinery operating outdoors.

To select the correct pillow block, take into account the shaft diameter, the expected radial and axial load, and the environmental conditions. Labyrinth or contact sealing protects against dust and water; in applications with frequent washdown, the variant with a reinforced radial shaft seal is preferable. The insert allows for initial misalignment, but the base must be well supported and the mounting bolts tightened with uniform torque. Lubrication is applied at the factory, and the condition of the seal should be checked at every maintenance interval.

Regarding equivalences, foot-mounted units are interchanged between brands by shaft number and hole configuration, but always verify the base dimensions and the center height. The DODGE SCH-E and SCM series have counterparts in other insert bearing lines, although the locking system may vary. If you need to replace an existing unit, send us the code stamped on the housing or the shaft and base dimensions.

MR Accesorios Industriales supplies the DODGE line with technical advice so you can choose the right variant. If you cannot find the reference you are looking for, write to us on WhatsApp with the part number or model you need and we will send you a quote shortly. We can also point you to the compatible alternative within the same family of mounted units.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.