Pillow block bearing DODGE P2B-SCH-110L-E

DODGE P2B-SCH-110L-E is a pillow block bearing reference, within Bearing housings. Request a quote for P2B-SCH-110L-E via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SCH-E pillow block is a mounted pillow block with a ball insert bearing, designed to support rotating shafts in industrial equipment. It is used when the shaft must rest on a flat base, with the bearing housed in a casting that allows mounting and alignment. MR Accesorios Industriales supplies this DODGE line in Buenos Aires, Argentina, and helps you choose the correct part number for your application.

The SCH-E series designation is read in blocks: the letter P indicates pillow block; the number that follows, the size or shaft diameter; B refers to the split housing type; SCH identifies the insert bearing series with its locking system; the final number, the nominal diameter; and the letter L, the sealing or configuration variant. For example, P2B-SCH-110L-E combines the pillow block with an SCH insert for a 1.1/16" shaft or its metric equivalent. Knowing these blocks lets you order the exact replacement without ambiguity.

These pillow blocks are used in conveyors, belts, elevators, mixers, mills, pumps and fans. In Argentine industry they appear in food, cement, mining, paper and aggregate processing plants, where the environment often has dust, moisture or frequent washdowns. The pillow block housing facilitates mounting on steel structures or concrete bases, and the insert bearing accommodates slight misalignments typical of long shafts or field installations.

To select the pillow block, check the shaft diameter, the insert locking type (set screws, cone or adapter) and the sealing required for the environment. Installation requires a rigid base, alignment with the shaft and adequate lubrication. The SCH-E series usually incorporates seals that retain grease and block contaminants; if the equipment works with water or abrasive dust, the protection should be reviewed. Tighten the set screws or locking system according to the manufacturer's instructions and check radial clearance after mounting.

Regarding equivalences, pillow blocks with insert bearings from different brands can be interchanged if the main dimensions match: shaft diameter, base bolt hole spacing, center height and locking type. A similar part number is not enough; the mounting drawing and load capacity must be compared. If you need to replace a DODGE SCH-E with another brand, send us the measurements and we will indicate the compatible alternative.

To request a quote for a DODGE SCH-E pillow block, send the complete part number shown on the plate or on the old bearing via WhatsApp, for example P2B-SCH-110L-E. If you don't have it at hand, send us a photo and the shaft and base measurements. At MR Accesorios Industriales we reply promptly with the quote and, if needed, offer the equivalent option so your equipment keeps running.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.