DODGE P2B-SCFS-104S-SHFS pillow block bearing

DODGE P2B-SCFS-104S-SHFS is a reference of pillow block bearing, within Bearing housings. Request a quote for P2B-SCFS-104S-SHFS via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The SCFS series Y-bearing pillow block with insert bearing is a mounted bearing unit: the cast iron housing and the ball unit come assembled as a single piece, ready to be fixed onto a flat base. It is used to guide shafts in equipment where alignment and sealing of the support point define the service life of the assembly. MR Accesorios Industriales supplies this DODGE line in Buenos Aires, Argentina.

The SCFS series designation is read in blocks. The first part identifies the housing type and its mounting method; the central block corresponds to the housing series, in this case SCFS, which defines the two-bolt pillow block format. The suffixes that follow indicate the shaft diameter and the sealing or insert variants. An example in the line is P2B-SCFS-104S-SHFS: there you can see the housing prefix, the SCFS series, the size code and the configuration suffix. To request a quote, send us the complete part number as shown on the nameplate or drawing.

These pillow blocks appear in belt conveyors, bucket elevators, mixers, screens, fans and process lines in food, chemical and aggregate plants. In Argentina they are found in sugar mills, meat processing plants, water treatment plants and metalworking shops, always on drive shafts with moderate loads and medium speeds. The pillow block housing allows mounting on sheet metal structures or profiles without machining special seats, which simplifies replacement in existing equipment.

To choose correctly, take into account the shaft diameter and tolerance, the type of load (radial, axial or combined) and the environmental conditions. Sealing is key: in environments with dust, water or frequent washing, a configuration with a reinforced seal is advisable. Check the base alignment before tightening the bolts and leave the axial clearance according to the intended mounting. Lubrication of the insert unit is defined by the duty cycle and temperature; in applications with vibration, check the tightening of the insert locking screws.

Regarding equivalences, Y-bearing pillow block series with insert bearing are interchanged between manufacturers by shaft diameter and housing type, but not by part number: each brand uses its own nomenclature for the seal and the insert. Therefore, it is advisable to compare bore dimensions, distance between fixing centers and shaft height before replacing. We will indicate the compatible alternative from another line. Send the part number or model you need on WhatsApp and we will quote you promptly.