DODGE P2B-SCFS-008L-SHFS pillow block bearing

DODGE P2B-SCFS-008L-SHFS is a reference of pillow block bearing, within Bearing housings. Request a quote for P2B-SCFS-008L-SHFS via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE SCFS series pillow block with insert bearing is a mounted unit that combines a cast iron housing with an insert ball bearing, ready to be fixed onto a flat base. It is used to guide and support rotating shafts in equipment where alignment and sealing of the support point are critical, and it simplifies mounting because it arrives assembled and factory lubricated.

The designation of these pillow blocks is read in blocks. In P2B-SCFS-008L-SHFS, the prefix P2B identifies the two-bolt pillow block; SCFS is the housing and insert series; the central number, such as 008 or 010 in the examples, indicates the nominal shaft diameter; and the suffixes L and SHFS refer to the seal configuration and the insert locking type. With that data, the exact variant needed by each piece of equipment is defined.

In Argentine industry these pillow blocks appear in belt and roller conveyors, bucket elevators, mixers, screens, centrifugal pumps and process lines in food, chemical and aggregate plants. They are also found in water treatment equipment and agricultural machinery, where a dusty or humid environment demands a robust support that is easy to replace during a maintenance shutdown.

To choose well, you must check the shaft diameter, the type of load and the rotation speed, and define the seal according to the environment: simple contact for clean areas, more closed seals for dust or liquids. During mounting, rest the pillow block on a flat, rigid surface, align the mounting holes and tighten the bolts in pairs. The insert is fixed to the shaft with the set screws on the inner ring, and it is advisable to lubricate and check the clearance before starting up.

Mounted pillow blocks are interchanged between manufacturers by the combination of shaft diameter, hole spacing, height to center and seal type, not only by the part number. Therefore, when looking for an equivalent, it is advisable to compare those dimensions and the insert locking method. At MR Accesorios Industriales we indicate the compatible alternative when the original reference does not match the one you are looking for.

If you need to replace an SCFS series pillow block, send us on WhatsApp the full part number shown on the part, for example P2B-SCFS-008L-SHFS, along with the shaft diameter and a photo of the mounting. With that we will quote you the DODGE reference or the alternative that best suits your equipment, and we will reply promptly.