Pillow block bearing DODGE P2B-SCBAH-110L

DODGE P2B-SCBAH-110L is a pillow block bearing reference, within Bearing housings. Request a quote for P2B-SCBAH-110L via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SCBAH Y-bearing pillow block is a mounted pillow block: the cast iron housing and the insert bearing come assembled as a single unit, ready to be fixed to the structure. It is used to guide shafts in equipment where alignment and sealing must withstand dust, humidity and continuous operation. MR Accesorios Industriales supplies it in Buenos Aires, Argentina, and advises you on choosing the correct size.

The designation is read in blocks. P indicates the housing type, B the pillow block variant, and the number that follows defines the number of holes and the housing format. Then SCBAH appears, which identifies the insert series and its shaft locking system. The last segment, as in P2B-SCBAH-008L or P2B-SCBAH-204L, corresponds to the shaft size and the sealing type. Comparing these examples shows how the final suffix changes according to the application.

These pillow blocks appear in belt conveyors, bucket elevators, mills, mixers, screens and packaging lines. In agriculture they are seen in seeders and grain handling equipment; in food and beverage plants, on low and medium speed shafts with frequent washdowns. They are also used in fans, centrifugal pumps and textile machines, where the pillow block simplifies mounting on sheet metal or profiles.

To select correctly, start from the shaft diameter and the load type: predominantly radial in most cases, with some axial depending on the insert. Check the sealing, because it defines how much contamination the bearing tolerates, and the shaft locking system, which may be set screw or adapter sleeve. During assembly, rest the base on a flat surface, align the holes and tighten gradually; adequate lubrication and careful alignment extend the life of the assembly.

Between brands, Y-bearings are interchanged by shaft size, housing configuration and insert type, not by the complete part number. The same diameter may appear with different base heights, seals or locking systems, so it is advisable to compare these variables before replacing. If the original part number does not match, the compatible alternative is found by dimensions and performance. Send the part number or model you need on WhatsApp to MR Accesorios Industriales and we will quote it promptly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.