DODGE P2B-SCB-111 pillow block bearing

DODGE P2B-SCB-111 is a reference of pillow block bearing, within Bearing housings. Request a quote for P2B-SCB-111 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The SCB pillow block is a mounted unit that combines a cast iron housing with an insert ball bearing, ready to be fixed to a flat base. It is used to support rotating shafts in equipment where alignment and sealing are critical, such as conveyor belts, fans or mixers. MR Accesorios Industriales sells this DODGE line in Buenos Aires, Argentina.

The SCB series designation is read in parts: the letter P indicates pillow block, the number that follows defines the shaft diameter (for example, P2B-SCB-012 for a 12 mm shaft and P2B-SCB-100 for a 1 inch shaft), and the SCB suffix identifies the insert bearing series with its sealing and locking characteristics. Codes with a hyphen and three digits usually correspond to metric or inch sizes according to the manufacturer's standard.

These pillow blocks are used in the food, cement, mining and aggregate processing industries, where there is dust, humidity or frequent washdowns. In Argentina you will find them in belt conveyors, bucket elevators, screens, mixers and industrial fans. The cast iron housing and the sealed insert resist contamination and allow operation with slight misalignment, which simplifies mounting on welded structures.

To select the pillow block, check the shaft diameter and the type of insert locking (set screws or cone). Check the sealing: SCB series usually include lip or contact seals that retain grease and exclude dust. During mounting, align the base with the shaft and tighten the fixing bolts evenly; proper lubrication and correct internal clearance extend service life. If the equipment operates with vibration, consider additional fastening.

Regarding equivalents, pillow blocks with insert bearings are interchangeable between brands if the mounting dimensions match (height to center, distance between holes and shaft diameter). There is no single standard, so it is best to compare drawings or samples. DODGE is a reference in the market, and MR sells its line; for other alternatives, we can indicate the compatible option for your application.

If you need an SCB pillow block for a specific shaft, send us the complete code on WhatsApp. At MR Accesorios Industriales we will quote you promptly and, if you are looking for a variant you do not see, write to us with the model or dimensions and we will indicate the compatible alternative. We also manufacture split plummer block housings and custom parts for special needs.