Pillow block bearing DODGE P2B-SCAH-55M

DODGE P2B-SCAH-55M is a pillow block bearing reference, within Bearing housings. Request a quote for P2B-SCAH-55M via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SCAH series pillow block is a mounted unit that combines a cast-iron housing with a ball insert bearing, already aligned and lubricated from the factory. It is used to support rotating shafts in conveyors, fans, mixers and transmission equipment, where a rigid base with two mounting holes is required. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, with technical advice to choose the correct size according to shaft diameter and working conditions.

The SCAH series designation is read in blocks: P2B indicates a two-bolt pillow block, SCAH identifies the housing family and the insert type, and the final number with the letter M indicates the bore size for the shaft. That is why references such as P2B-SCAH-17M, P2B-SCAH-20M or P2B-SCAH-35M coexist: the shaft diameter changes, not the housing geometry. The suffix M distinguishes the metric mounting variant within the series. The complete part number unambiguously identifies the unit you need.

These pillow blocks appear in food, beverage, aggregate processing, pulp and paper plants, and in packaging lines. They are also found in air conditioning equipment, conveyor belts, bucket elevators and machine tools. In Argentina they are chosen for the robustness of the cast-iron housing and for the ease of replacing the insert without completely disassembling the shaft. MR Accesorios Industriales supplies them for maintenance and new projects throughout the country.

To select correctly, start from the shaft diameter required by the equipment and verify the radial and axial load of the assembly. Check the insert sealing: in dusty or humid environments, additional protection is advisable. During mounting, support the housing on a flat, clean surface, tighten the anchor bolts in a cross pattern and check alignment with a straightedge or dial indicator. The insert lubrication comes from the factory; in service, follow the equipment's greasing plan and avoid excess that could damage the seals.

Mounted units of this type are interchangeable between manufacturers if the shaft diameter, center height, hole spacing and insert locking type match. When requesting an equivalent, provide the complete part number and main dimensions: with that, the compatible unit is identified. Do not mix inserts from different series within the same housing, because the outer ring and locking system vary. If in doubt, consult us and we will indicate the alternative that best fits your equipment.

If you have the part number of the unit you are replacing, send it via WhatsApp to MR Accesorios Industriales along with a photo of the assembly. We will quote the DODGE SCAH reference or the compatible alternative and support you during commissioning. We handle technical maintenance, purchasing and project inquiries from Buenos Aires, Argentina, for all industry.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.